Cooktop Maintenance And Cleaning - Kenmore 970-6885 Series Use & Care Manual

Hide thumbs Also See for 970-6885 Series:
Table of Contents

Advertisement

Care & Cleaning
Cooktop maintenance
Consistent and proper cleaning is essential to maintaining
your ceramic glass cooktop.
Prior to using your cooktop for the first time, apply the
recommended CookTop® Cleaning Creme to the ceramic
surface (on the web visit www.sears.com for replacement
cooktop cleaner, item number 40079). Buff with a
nonabrasive cloth or no-scratch cleaning pad. This will
make cleaning easier when soiled from cooking. The
special cooktop cleaning cream leaves a protective finish
on the glass to help prevent scratches and abrasions.
Sliding aluminum or copper clad bottom pans on the
cooktop can cause metal markings on the cooktop surface.
These marks should be removed immediately after the
cooktop has cooled using the cooktop cleaning cream.
Metal marks can become permanent if not removed prior
to future use.
Cookware (cast iron, metal, ceramic or glass) with rough
bottoms can mark or scratch the cooktop surface.
Do not:
• Use cookware with dirt or dirt build up on bottom;
replace with clean cookware before using.
• Use your cooktop as a cutting board or work surface in
the kitchen.
• Cook foods directly on the cooktop surface without a
pan.
• Drop heavy or hard objects on the ceramic glass
cooktop, they may cause it to crack.
• Slide anything metal or glass across the cooktop.
Cooktop cleaning
DO NOT use a cooktop cleaner on a hot
cooktop. The fumes can be hazardous to your health, and
can chemically damage the ceramic-glass surface.
Before cleaning the cooktop, be sure the
controls are turned to OFF and the cooktop is COOL. The
glass surface could be hot and burns may occur if the
glass surface is touched before it has cooled sufficiently.
For light to moderate soil:
Apply a few drops of CookTop® Cleaning Creme directly
to the cooktop. Use a paper towel or use a nonabrasive
plastic type no-scratch cleaning pad to clean the entire
cooktop surface. Make sure the cooktop is cleaned
thoroughly, leaving no residue.
For heavy, burned on soil:
Apply a few drops of CookTop® Cleaning Creme directly
to the soiled area. Rub the soiled area using a nonabrasive
plastic type no-scratch cleaning pad, applying pressure as
needed. Do not use the pad you use to clean the cooktop
for any other purpose.
If soils remain, carefully scrape soils with a metal razor
blade scraper, holding scraper at a 30 degree angle to the
surface. Remove loosened soils with cooktop cleaning
cream and buff surface clean.
Plastic or foods with a high sugar content:
These types of soils need be removed immediately if spilled
or melted onto the ceramic cooktop surface. Permanent
damage (such as pitting of the cooktop surface) may occur
if not removed immediately. After turning the surface
elements OFF, use a razor blade scraper or a metal spatula
with a mitt and scrape the soil from the hot surface (as
illustrated). Allow the cooktop to cool, and use the same
method for heavy or burned on soils.
33
30°

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

970-6895 series

Table of Contents