Cleaning The Paper Path; Checking Ink Levels - Epson PM-400 Quick Manual

5. Do one of the following:
■
If there are no gaps, the print head is clean. Select
press the
OK
■
If there are gaps or the pattern is faint, select
button. Then press
Caution: Never turn off the product during a cleaning cycle or you may
damage it.
After cleaning the print head, you can print another nozzle check pattern by
selecting
Nozzle Check
Cleaning

Cleaning the Paper Path

If your printouts are smeared or scuffed, or your paper does not feed correctly, clean the
paper path inside the printer by following the steps below.
Note: Do not use tissues to clean the inside of the product; lint from tissues may clog
the print head nozzles.
1. Load a sheet of paper in the product.
2. Press if necessary, then select
3. Follow the instructions on the LCD screen to clean the paper path.
4. Repeat as necessary until the paper comes out clean.

Checking Ink Levels

To check the ink level in the cartridge, press
Press to exit.
OK
Note: The ink level displayed is an approximate.
If are you printing from a computer, a window may also appear on your computer screen
when you try to print when ink is low. This window can optionally display ink offers and
other updates from Epson.
Note: To disable checking for ink offers or updates from Epson, see the instructions in
your online User's Guide.
button.
x to clean the print head.
and pressing the
and press the button.
OK
Setup
Finish Nozzle Check
Head Cleaning
button. Otherwise, select
OK
> >
Maintenance Paper Guide Cleaning
if necessary, and select
Cleaning the Paper Path
and
and press the
OK
Finish
.
.
Setup > Ink Level
11