Table Of Contents; General Information - Hilti TE 2 Operating Instructions Manual

ORIGINAL OPERATING INSTRUCTIONS
TE 2/TE 2-S/TE 2-M Rotary Hammer
It is essential that the operating
instructions are read before the
tool is operated for the first time.
Always keep these operating
instructions together with the tool.
Ensure that the operating
instructions are with the tool when
it is given to other persons.
Operating controls
Chuck release ring (TE 2-M)
Function selector switch
Control switch
Forwards / reverse switch
Lockbutton
Component parts
Dust shield
Chuck
Side handle
Type plate
Contents
General information
Technical data
Safety rules
Specific safety rules and symbols
Functional description
Assembly
Operation
Forwards/reverse rotation
Care and maintenance
Accessories
Manufacturer's warranty - tools
Disposal
Troubleshooting
Printed: 07.07.2013 | Doc-Nr: PUB / 5070802 / 000 / 00

General information

In these operating instructions, this symbol indicates
points of particular importance to safety. The instruc-
tions at these points must always be observed in order
to avoid the risk of serious injury.
Caution: Electrical
In this operating instruction, this symbol warns of haz-
ards as a result of electrical current. The instructions at
these points must always be followed in order to reduce
the risk of serious injury or damages to property.
The numbers refer to the illustrations. The illustra-
tions can be found on the fold-out cover pages. Keep
these pages open while you read the operating instruc-
tions.
In these operating instructions, the power tool to which
these operating instructions apply is referred to as "the
tool".
Page
1
2
2
3
4
5
6
7
7
7
7
8
8
en
1