Playing Voice Demo; Touch Sensitivity; Transpose - Medeli SP3000 Onwers Manual

aw_SP3000_Manual_G04_150723.ai 12 2015/7/23 11:20:07 aw_SP3000_Manual_G04_150723.ai 12 2015/7/23 11:20:07
Advanced Use
Split Point：
The point on the keyboard that separates UPPER or DUAL voice and
LOWER voice is called "split point".
The default split point is: F#3（34）.
1. Press and hold the [LOWER] button, then press any key to set split
point.
2. Release the [LOWER] button, and automatically exit the split point
setting.

Playing Voice Demo

1.
In voice mode, press and hold the [SHIFT] button, then press the
[VOICE DEMO] button to start playing back voice demo. While the
voice demo is playing, you can repeat above operations to exit
voice demo mode.
2.
Press the [START/ STOP] button to stop playing voice demo mode.

Touch Sensitivity

The keyboard is equipped with a touch response feature that lets you
dynamically and expressively control the level of the voice with your
playing strength – just as on an acoustic instrument. That means the
harder you play the keys, the greater volume comes from the
speakers with fixed master volume. Turn this function off results in a
fixed touch response, or no level change no matter how hard or how
soft you play the keys. There are 3 types of touch setting for this
C
instrument (Off, 1-3), the default setting is: "2".
M
Operation:
Y
Press and hold the [SHIFT] button, then press the key which
CM
represents touch +/- to select an appropriate touch level.
MY
Parameters
CY
OFF
CMY
1
K
2
3

Transpose

This function allows the overall pitch of the instrument to be
transposed up or down by a maximum of one octave in semitone
increments.
For example, you have to play a song in G key which you are not
familiar with. So please set the transpose value to be -05 or 07, then
you can easily play this song with C key.
Operation：
1. Press the [TRANSPOSE] button, the nixie tube displays current
transpose value, such as "07". Press the [+/YES]/[-/ NO] button to
set transpose value, the entire keyboard pitch will be changed.
2. Press the [+/YES] and [-/NO] buttons simultaneously to recover the
default value: "0".
Parameters
Transpose +
Transpose -
12
Description
Fixed
Soft
Medium
Hard
Description
Increase entire keyboard pitch in semitone step.
Decrease entire keyboard pitch in semitone step.
A0 Default Split Point：F#3
TOUCH