Setup; Part List; Setup Guide - Medeli CDP5000 Owner's Manual

Setup

This section contains information about setting up your instrument and preparing to play. Please go through this section carefully
before turning the power on.

Part List

Before you proceeding to assemble the stand, get a Philip's
screwdriver (not supplied).
Make sure you have the following parts, which are supplied into
package.
13
2
3
7. Hand screw (2) 9. Φ6x50 "+" screw (8)

Setup Guide

STEP 1: First of all make 4 PCS Horizontal hole nut into the holes in
the pedal box as picture shown, ensure that Horizontal hole
nut hole is aligned with the pedal box holes, then use 4 PCS
Ф6x50 screws to fix the left/right ST board to the pedal box,
and cover the screw cap as shown.
6
1
4
12
6
8
10. Screw cap (8) 12. Horizontal hole nut(4)
After assembly horizontal hole nut
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
14
5
11
7
9
13. 4x15BM"+"screw(2)
Piano body
ST side board left
Left speaker box
Speaker line
Right speaker box
Pedal line
Hand screw (2)
Pedal box
Φ6x50 "+" screw (8)
Screw cap (8)
ST side board right
Horizontal hole nut(4)
4x15BM"+"screw(2)
Gasket(2)
10
14. Gasket(2)