Table of Contents
Advertisement
Quick Links
Installation, Use and Maintenance of the INOX appliance
Ensure that the heater is installed and used according to these instructions.
The electrical installation must comply with the current UK regulations.
IMPORTANT INFORMATION
• Under no circumstances should the heater be covered with clothes or other items
that prevent air circulation. The heater must not be mounted under furniture or other
objects that prevent air circulation, such as curtains.
• The heater must be installed away from all flammable objects and must not be
mounted so that children without supervision may affect the operation of the heater.
• Under no circumstances should the appliance be installed below an electric power
point.
• Do not use the heater to dry clothing or other combustible material.
• The heater should not be not be installed in places where there is a risk of splashing
water, such as bathtubs, toilets, showers etc.
• The appliance must be placed at a distance that ensures that the switches and
thermostat unit are not reachable directly or indirectly by a person taking a bath or
shower (in compliance with the current UK regulations).
• If the power cable is damaged, it should only be replaced by a qualified electrician,
in order to avoid possible risks.
• Minimum distance to the floor from the bottom of the heater: 100mm
• Minimum clearance above the heater: 300mm
• Minimum clearance to the side: 100mm
• Do not insert foreign objects into the holes on the heater.
• This appliance is not intended to be used by people (including children) whose
physical, sensory or mental abilities are reduced or lacking experience or knowledge,
unless they have supervision or instructions concerning the use of the appliance by a
person responsible for their safety.
• Children should be supervised to ensure they do not play with the heater.
Warning
INSTALLATION
OPERATION
In order to avoid the appliance overheating, DO NOT COVER
this heater.
When the appliance is operating the top of the heater
will be very hot to touch.
MAINTENANCE
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Ducasa INOX
Summary of Contents for Ducasa INOX
- Page 1 INSTALLATION OPERATION MAINTENANCE Installation, Use and Maintenance of the INOX appliance Ensure that the heater is installed and used according to these instructions. The electrical installation must comply with the current UK regulations. IMPORTANT INFORMATION • Under no circumstances should the heater be covered with clothes or other items that prevent air circulation.
- Page 2 Assembly instructions Wall fixing (see Figure 1): Wherever possible, install the heater on an external wall (cold) under a window. Do not install the heater near a ventilation system; this could interfere with the heat flow. Respect the specified minimum distances (see Figure 2):. 1.
- Page 3 Instructions for use VERY IMPORTANT: Before you operate the heater, completely remove the blue protection sheet from the front cover. 2. Signal light 1. Main On-Off switch 4. Display 3. Thermostat’s Knob Main switch (1): Located on the back of the heater Signal light (2): Whenever the indicator light is on, the appliance will be heating until it...
- Page 4 Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal. UK Distributor of Ducasa Products: Heattend Products Ltd Web: www.heattend.co.uk...
Need help?
Do you have a question about the INOX and is the answer not in the manual?
Questions and answers