Honeywell Dolphin CT50 User Manual page 48

Chapter 3 — About the Scanner
Data Processing Settings (continued)
Setting
Suffix
Data Editing Plugin
Symbology Prefix
Launch Browser
Scan to Intent
40
Description
Defines the string added after the decoded bar code
data. Substitutions occur within the Suffix string values
as follows:
• \r or \x0A is replaced by 13
• \n is replaced by 10
• \t or \x09 is replaced by 9
• \\ is replaced by '\'
Specify a Total Freedom data editing plug-in.
Specify a symbology identifier prefix to the bar code
data. Options include:
• None
• Honeywell
• AIM
Enable or disable URL bar code handling. If a bar code
starts with http:// or https://, the browser opens using the
bar code data as a URL.
Corresponds to BarcodeReader property:
PROPERTY_DATA_PROCESSOR_LAUNCH-
BROWSER
Enable or disable special handling of scan-to-intent bar
codes. Applies to bar codes in one of the following
formats:
'//' ACTION
'//' ACTION '$' extra-data
Where:
ACTION and extra-data are any string of characters.
Launches an application listening for the intent:
Intent action: "com.honeywell.scantointent.intent.action."
+ ACTION
Intent extra
"com.honeywell.scantointent.intent.extra.DATA" contains
the remainder of the bar code data after the first '$'
character.
Corresponds to BarcodeReader property:
PROPERTY_DATA_PROCESSOR_SCAN_TO_INTENT
Dolphin CT50 and CT50h Mobile Computer User Guide
Default
None
None
None
Enable
Enabled