Clean The Computer - Honeywell Dolphin CT50 User Manual

Hide thumbs Also See for Dolphin CT50:
Table of Contents

Advertisement

Chapter 7 — Manage and Maintain the Computer

Clean the Computer

76
1 Tap All Apps > Settings.
2 Tap Backup & Reset.
3 Tap Factory Data Reset.
4 Select any options you want to include, such as erasing the SD card.
5 Tap Reset phone. The computer performs the clean boot procedure
and turns off.
6 Press the Power button to turn on the computer. You will need to set
up your computer again.
Note: You can use this basic cleaning process to clean the CT50 and
CT50h computers. However, please refer to the Honeywell Disinfectant-
Ready Housings Data Sheet on
tested disinfectants and recommendations for disinfecting the CT50h
computer.
To keep the computer in good working order, you may need to clean the
scanner window, color camera window, and the touch screen. Clean the
windows and the touch screen as often as needed for the environment in
which you are using the computer. The computer will withstand
application of the following cleaning agents when applied to a clean soft
cloth and removed immediately with a dry soft cloth:
Acetic acid, 10% in water
Ethyl alcohol, 10% in water
Mild soap solutions
Caution: There are no user-serviceable parts inside the computer.
Opening the computer will void the warranty and may cause
damage to the internal components.
Note: Honeywell recommends that you must leave the battery installed
when you clean the computer. Leaving the battery installed helps
prevent fluids from entering the computer through the microSIM card
and microSD card connectors.
1 Press the Power button to suspend the computer.
2 Dip a clean cloth towel in the cleaning agent and wring out the
excess.
Dolphin CT50 and CT50h Mobile Computer User Guide
www.honeywellaidc.com
for a list of

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dolphin ct50h

Table of Contents