Rear Door Lock Actuator - Subaru LEGACY 2004 Service Manual

11.Rear Door Lock Actuator

A: REMOVAL
1) Remove the rear door latch & door lock actuator
assembly. <Ref. to SL-34, REMOVAL, Rear Door
Latch and Door Lock Actuator Assembly.>
2) Remove the pawl of rear door latch security cov-
er, and then remove the cover. (Except for EK mod-
el)
3) Remove the screw from the rear door latch and
door lock actuator, and then remove the door lock
actuator. (Except for EK model)
(1)
(1) Rear door lock actuator
B: INSTALLATION
Install in the reverse order of removal.
NOTE:
Make sure the lock works correctly after installa-
tion.
C: INSPECTION
1) Disconnect the door lock actuator harness con-
nector.
2) Connect the battery to door lock actuator termi-
nals.
If defective, replace the door lock actuator.
1. Model without double lock
Terminal No.
No. 2 (+) and No. 1 (−)
No. 1 (+) and No. 2 (−)
Rear Door Lock Actuator
SL-00282
2 1
SL-00235
Actuator operation
Unlocked → Locked
Locked → Unlocked
2. Model with double lock
6 5 4 3 2 1
DOOR ACTUATOR RH:
Terminal No.
No. 5 (+) and No. 1 (−)
No. 1 (+) and No. 5 (−)
No. 6 (+) and No. 1 (−)
No. 1 (+) and No. 6 (−)
DOOR ACTUATOR LH:
Terminal No.
No. 2 (+) and No. 6 (−)
No. 6 (+) and No. 2 (−)
No. 1 (+) and No. 6 (−)
No. 6 (+) and No. 1 (−)
SL-35
SECURITY AND LOCKS
SL-00283
Actuator operation
Unlocked → Locked
Locked → Unlocked
Double lock released →
Double lock set
Double lock set → Double
lock released
Actuator operation
Unlocked → Locked
Locked → Unlocked
Double lock released →
Double lock set
Double lock set → Double
lock released