Download Print this page

AEG VSS 260 Instructions For Use page 4

Hide thumbs Also See for VSS 260:

Advertisement

8 Protection of Environment
Through the integrated suction operation the dust is
extracted through the perforated base plate directly
into the dust bag (4).
When putting the dust bag onto the suction
nozzle (6) the groove of the dust bag (4) must
correspond with the guide slots of the suction
sleeve.
In case of decreasing suction power the dust bag
(4) must be emptied. For this take off the dust bag
(4) by pressing the clamping connection (5) firmly
together.
For the extraction of a great amount of dust a
suction hose can be connected to the suction
nozzle.
We recommend the AEG suction hose which is
suitable for AEG wet and dry vacuum cleaners as
well as domestic vacuum cleaners.
9 Accessories
Paper filters are available as an accessory. When
putting on the filter let the cardboard engage in the
plastic connection.
Put the dust bag over the paper filter. By using this
double dust protection all of the dust is kept inside.
Further accessories with part numbers are shown in
our catalogues.
Tips on selecting the emery of sandpaper
Rough sanding of hard wood,
Rough sanding of soft wood,
finish sanding of planed or
machined surfaces
Finish sanding of hard and soft wood,
finish sanding/polishing of fillers
and veneers to bring out the wood grain
Use only AEG accessories and spare parts. Should
components need to be exchanged which have not
been described, please contact one of our AEG
service agents (see our list of Guarantee/Service
Addresses).
11 Modifications
Text,. diagrams and data are correct at the time of
of our products, technical specifications are subject
to alteration without prior notice.
Classification
coarse
medium
fine
Grit

Advertisement

loading

This manual is also suitable for:

Vsse 260