carownersmanual.net
carownersmanual.net
Odometer and two trip meters
This meter displays the odometer and
two trip meters.
1. Odometer—Shows
the vehicle has been driven.
2. Two trip meters—Show two different
distances
the last time each trip meter was set
to zero.
You can use one trip meter to calculate
the fuel economy and the other to
measure the distance on each trip. All
trip meter data is cancelled if the elec-
trical power source is disconnected.
90
3. Trip meter reset knob—Resets the two
trip meters to zero, and also change
the meter display.
To change the meter display, quickly
push and release the knob. The meter
display changes in the order from the
odometer to trip meter A to trip meter
B, then back to the odometer each
time you push.
To reset the trip meter A to zero, dis-
play the meter A reading, then push
and hold the knob until the meter is
set to zero. The same process can be
applied for resetting the trip meter B.
the
total
distance
independently driven since
'04 MATRIX_U (L/O 0307)
Outside temperature display
The outside temperature is indicated on
the display when the ignition switch is
on.
The displayed temperature ranges from
−30_C (−22_F) up to 50_C (122_F).
If
there
is
any
connection of the outside air temperature
sensor, "−−" will appear on the display. If
"−−" appears on the display, contact your
Toyota dealer.
There may be a case that "−−" appears
momentarily when the ignition is quickly
turned to "ON". It is normal if it goes out
soon.
2004 MATRIX from Oct. '03 Prod. (OM12861U)
abnormality
in
the