P Reparing The S Tand - Oster FPSTSM5101 User Manual

F Y
eatures oF our
P
reParing the
Before preparing the mixer for use, be sure the speed control dial is in
the OFF position and the electric cord is unplugged. Be sure to wash
bowls and attachments before initial use.
Figure 1
t
urntaBle
l B
arge Owl
P H
OsitiOn Ole
s
tand
m B
ixer ase
r l
aising and
Press the tilt release button, located at the top of the neck of the
Stand Mixer. While the button is depressed, hold the handle (1)
and ease the head of the Stand Mixer back. The head will lock into
this tilt position (2).
To lower the mixing
head, press the tilt
release button. While
the button is depressed,
hold the handle (2) and
ease the head of the
Stand Mixer down (1).
A "click" sound will
indicate when the mixer
head has locked into
position. (See Figure 2)
s M
tand ixer
s M
tand
M
owering the
Figure 2
English-6
( .)
cont
u
ixer For se
P t
osition the
Position the turntable by fitting
the prongs into the right hole
with Large Bowl Icon. (Not
Center Hole) (See Figure 1).
Note: For Stand Mixer to
operate properly, Turntable
must be in the correct position.
h
ixing ead
urntable