Table of Contents
Advertisement
18 | Operation with open flap
5.4.3 Resetting heating program to factory
settings
If you need a heating program with its original
settings, you can reset the heating program to its
factory settings.
B Open flap.
B Press the menu button.
The MAIN MENU is displayed, the Vacation
menu option is marked.
B Turn the dial to mark the Heating menu
option.
B Press the dial.
The HEATING menu is displayed, the Program
menu option is marked.
B Press the dial.
The HEATING PROGRAM menu is displayed,
the Activate menu option is marked.
B Turn the dial to mark the Edit menu option.
B Press the dial.
The EDIT HEATING PROGRAM menu is
displayed, the A:Program A menu option is
marked.
B Turn the dial to select another heating
program.
-or-
B Press the dial.
The EDIT PROGRAM A menu is displayed, the
Replace with preset program menu option is
marked.
6 720 643 265 (2010/05)
B Turn the dial to mark the Reset factory
settings menu option.
9
6
3
Fig. 15
Reset factory settings menu option
B Press the dial.
The input field No flashes.
B Turn the dial to set Yes.
B Press the dial to confirm the setting.
The message The heating program A has
been reset to factory settings is displayed.
B Press the dial.
The Reset factory settings menu option is
marked again.
B Press the menu button to leave the menu.
The remote control works with the heating
program's factory settings.
US/CA
12
15
h
18
24
21
h
6 720 643 262-03.1O
Advertisement
Table of Contents
