Resetting A Heating Program To Its Factory Settings - Bosch FW 100 Operating Instructions Manual

20 | Operation with flap open
5.4.3 Resetting a heating program to its
factory settings
If you require a heating program to be returned to
its original settings, you can implement a reset to
the factory settings.
B Open flap.
B Press the menu key.
The MAIN MENU is displayed; menu point
Holiday is highlighted.
B Turn the rotary selector to highlight menu
point Heating.
B Push the rotary selector.
Menu HEATING is displayed; menu point
Programme is highlighted.
B Push the rotary selector.
Menu HEATING PROGRAMME is displayed;
menu point Activate is highlighted.
B Turn the rotary selector to highlight menu
point Edit.
B Push the rotary selector.
Menu EDIT HEATING PROGRAMME is
displayed; menu point A:Programme A is
highlighted.
B Turn the rotary selector to select a different
heating program.
-or-
B Push the rotary selector.
Menu EDIT PROGRAMME A is displayed;
menu point Copy from preset programme is
highlighted.
6 720 645 350 (2010/09)
B Turn the rotary selector to highlight menu
point Reset factory settings.
9
6
3
Fig. 15 Menu point Reset factory settings
B Push the rotary selector.
The input field No flashes.
B Turn the rotary selector to set Yes.
B Push the rotary selector to confirm the
setting.
The message The heating programme A has
been reset to factory settings will be
displayed.
B Push the rotary selector.
Menu point Reset factory settings is
highlighted again.
B Press the menu key to exit the menu.
The controller then operates again with the
factory settings of that heating program.
12 15
h
18
24 21
h
6 720 645 348-03.1O