If You Would Like To Change The Heating Program Temporarily - Bosch FB 100 Operating Instructions Manual

8 | Operation with closed flap
4.2 If it is too cold or too warm for
you
The desired room temperature is an
orientation value that the remote
control tries to achieve. Deviations
from the actually-achieved room
temperature can occur.
You can read the current temperature from the
display.
Displaying the temperature setting
B Turn dial one click.
Changing the temperature setting temporarily
With the flap closed, you can temporarily change
the room temperature with the dial
You can also change the room
temperature permanently
( section 5.2).
B Rotate dial until the desired day room
temperature is displayed.
The temperature display flashes.
-or-
B Turn the dial to set the heating WARMER or
COOLER.
The position arrows on the display bars flash.
B Press the dial.
The change applies until the next switch point
of your heating program has been reached.
After this, the settings of the heating program
resume.
6 720 643 265 (2010/05)
4.3 If you would like to change the
heating program temporarily
If you go to bed earlier, leave home longer or
come back earlier, you can use the
to set the next operating mode Comfort /
Economy / Frost of the heating program right
away. The heating program is thus changed
temporarily until the next switch point is
reached.
The operating mode switch under
the flap must be in the
(
Start "Come/Go"
B Briefly press
. The next operating mode Comfort / Economy
/ Frost of the heating program is started right
away. The change is shown in the display.
Ending "Come/Go" early
B Briefly press
"Come/Go" is ended and the remote control
returns to the heating program.
Fig. 3 [2], page 10).
button.
button.
US/CA
button
position