Table of Contents
Advertisement
US/CA
5.5
Setting up a vacation program
If you leave the house for several days, you can
set in the vacation program that there will be
neither heat nor hot water produced during this
time.
The heating program otherwise applicable is not
changed by doing this. The frost protection is
also guaranteed during the vacation program.
The vacation program works with the following
factory settings:
Heating: Frost
•
The factory settings guarantee
energy-saving and safe operation
during your vacation.
If you would nevertheless like to
change the factory settings, you
will find the possible settings in
the detailed installation and
operating instructions.
Operation with open flap | 19
5.5.1 Setting the beginning of vacation
If you have set the vacation
program to start on today's date, it
will start immediately.
Otherwise the vacation program
will start at 12:00am (00:00) on the
set day.
B Open flap.
B Press the menu button.
The MAIN MENU is displayed, the Vacation
menu option is marked.
9
6
3
Fig. 16
Vacation menu option
B Press the dial.
The vacation menu is displayed, the Start
menu option is marked.
B Press the dial.
The input field for the year flashes.
B Turn the dial to set the year.
B Press the dial to confirm the setting.
The input field for the month flashes.
B Set the month and day in the same manner as
the year.
After confirmation of the day, the Start menu
option is marked again.
15
12
h
18
24
21
h
6 720 643 262-38.1O
6 720 643 265 (2010/05)
Advertisement
Table of Contents
