Troubleshooting - Dell 2200MP User Manual

Hide thumbs Also See for 2200MP:

a. Menu Location: Select the location of the on-

screen display on the screen.

b. Projection Mode:

Front Projection-Desktop: The default setting.

ii.

Rear Projection-Desktop: The projector reverses the image so you can

project from behind a translucent screen.

iii.

Front Projection-Ceiling Mount: The projector turns the image upside down

for ceiling-mounted projection.

iv.

Rear Projection-Ceiling Mount: The projector simultaneously reverses and

turns the image upside down. You can project from behind a translucent screen

with a ceiling-mounted projection.

c. To adjust the size of the projected image, move the projector closer or further away

from the surface on which you are projecting.

For any further settings changes, please refer to the Owners' Manual included

with the projector.

TROUBLESHOOTING

1. No image appears on the screen

a. Ensure that the lens cap is removed and the projector is turned on

b. Ensure the external graphics port is enabled. If you are using a Dell portable

computer, press the F8 key. For other computers, consult your owner's manual.

c. Ensure that all the cables are securely connected as described in the installation

section.

d. Ensure that the pins of the connectors are not bent or broken

2. Partial scrolling, or incorrectly displayed image

a. Press the Resync button on the remote control or the control panel

b. If you are using a Dell portable computer: (for other computers consult your owner's

manual)

i. Set the resolution of the computer to SVGA (800 x 600):

(1) Right click on the unused portion of your Windows desktop

Settings tab.

(2) Verify the "Screen area" slide bar is set to 800 x 600 pixels.

ii. Press Function-F8

Y/AC/Staff/Documentation/ProjectorGuideShort 11/05 cc

Properties

Table of Contents