Seat Belt Information - NC SW9 Operator's Instruction Manual

SEAT BELT INFORMATION

Improper inspection of the seat belt could cause serious injury or loss of
•
life in the event of an accident.
In the event of an accident the entire seat belt system must be replaced.
•
If needed the seat belt must be replaced throughout the life of the
•
machine. The belt must get inspected at least once a year or more often
if the belt is exposed to harsh conditions.
If the seat belt shows signs of wear it is vital that the entire belt both
•
sides are replaced.
Before operating the machine it essential that all drivers
put on the seat belt.
To fit the seat belt correctly, pull the belt around your
waist and press buckle blade into buckle lock.
Pull belt webbing through buckle blade to remove slack.
The seat belt must be correctly adjusted every time.
If the belt is worn loose in the event of an accident or roll
over it may cause serious injury.
To release the seat belt press either of the red buttons on
the buckle lock and allow the seat belt to fully retract.
Buckle up it could save your life.
NOTE:
Keep the buckle area clean and dry. Dirt and other foreign items can gum up the works and
prevent your belt from buckling correctly, thereby weakening its ability to hold you firmly in
place during an accident or roll over.
If your seat belt does get dirty and needs cleaning use mild soap and warm water. Do not
use a strong detergent, bleach or dye, since these caustic fluids may weaken the belt's
material.
Safety Information
20