Rops Bar - NC SW9 Operator's Instruction Manual

Safe Operating Instructions

ROPS BAR

The dumper is fitted with a folding ROPS bar, which can be lowered for transportation
purposes.
LOWERING
To lower the ROPS remove the linch Key in the pin
•
(A). These are located on both sides of the ROPS.
Push ROPS bar backwards until holes (B) and (C)
•
line up.
Put the pins (A) through the hole (C) and refit the
•
linch keys.
RAISING
To raise the ROPS bar reverse the above steps.
•
MAINTENANCE
Check the pins are free and undamaged.
•
Regularly grease the pins to ensure they can be
•
removed easily.
Only lower ROPS when transporting on a trailer/lorry.
NEVER operate the dumper with the ROPS bar lowered as this could result
in serious injury or DEATH.
A
B
C
32