Rops - NC SW9 Operator's Instruction Manual

ROLL OVER PROTECTION STRUCTURE (ROPS)
FATIGUE AND FINITE LIFE PROBLEMS WITH ROPS.
ROPS on the whole are maintenance free but in the unlikely event of a failure it is usually
due to the operator not inspecting or periodically checking the ROPS for cracks, loose bolts,
damage or other normal wear and tear. Proper maintenance and routine checks of the ROPS
on the machine will insure lifesaving function and long life of the system.
FACTORS THAT LEAD TO MISUSE OR DAMAGE TO ROPS
Vibration can cause structure damage and/or when loading in some instances.
•
A corrosive environment.
•
Continued use of the ROPS after a roll over causing damage to the structure.
•
Unauthorized Modifications to the ROPS.
•
Mount fatigue.
•
Replacing bolts with the wrong grade or wrong torque setting.
•
Incorrect installation.
•
ATTACHMENT AND/OR MODIFICATIONS
ROPS are not intended as a load carrying member and should not be used to mount things
such as, pull hooks, winches, booms, etc. Non load bearing attachments such as mirrors,
fans, heaters, lights, etc. can be installed using manufacturers guidance.
REPAIR & MAINTENANCE
Water drainage holes should be kept free from dirt or blockages so that water does not get
•
trapped and freeze damaging the structure.
Paint peeling or corrosion on the ROPS should get immediate attention.
•
Replacement of the ROPS or mounts should be done in a professional way, replace worn
•
bolts and re-torque to correct settings.
Safety Information
19