Registration (Pairing); View Video Through Tv - Motorola MBP853CONNECT User Manual

When charging
1. Whilst the power is OFF, and the adapter is plugged in, an adapter logo will
appear on-screen and a flashing battery logo will display for 15 seconds.
The Blue LED at the top left corner will light up, indicating that the adapter
is plugged in.
2. Whilst the power is ON, and the adapter is plugged in, the battery icon at
the top right corner of the screen will show that the battery is charging. The
Blue LED at the top left corner will light up to indicate that the adapter is
plugged in.
2.4

Registration (Pairing)

The Baby monitor is pre-registered to your Parent Unit. You do not need to
register it again unless the Baby Unit loses its link with the Parent Unit.
To re-register your Baby Unit, or register a new Baby Unit, follow the procedure
below:
M
1. Press the button of the Parent Unit and the menu bar will pop up.
2. Press the LEFT button or
/ /
the
del
add view scan
3. Press the
O
button to confirm.
4. / /
cam cam cam
*1 2 3
to select the desired CAM and press the
a camera unit. The green audio level LED will flash rapidly while searching.
O
5. Press the
6. Press and hold the PAIR button underneath the Baby Unit until the Parent
Unit finds the camera, beeps and the video from the camera appears.
NOTE
If a particular Baby Unit was registered previously, registering this current
Baby Unit again will overwrite the old registration.
2.5

View Video Through TV

Connect a suitable AV cable into the AV OUT socket on the side of the Parent
Unit and into the AV input of the TV. Scroll to select
through the AV inputs on the TV menu until the Baby monitor picture is visible.
AV cable is an optional accessory, which is to be purchased separately.
Getting Started
/
menu will pop up.
UP button or DOWN button to select
/ will pop up, press the
cam
4
button to confirm.
RIGHT button until
UP button or
O
button to start searching for
V
is highlighted, and
, and press the
add
DOWN button
on the Parent Unit. Scroll
13