Connecting A Tv - Yamaha aventage RX-AS710 Owner's Manual

1 2 3 4 5 6 7 8 9 10 11
3

Connecting a TV

Connect a TV to the unit by using HDMI cable, so that video input to the unit can be
output to the TV.
You can also enjoy playback of TV audio on the unit.
■
HDMI connection
Connect the TV to the unit with an HDMI cable and a digital optical cable.
HDMI OUT jack
The unit (rear)
HDMI OUT
HDCP2.2
TRIGGER ARC
HDMI 1 (BD/DVD)
HDMI OUT HDMI
OUT
HDCP2.2
12V 0.1A
HDMI
ARC HDCP2.2 HDCP
OPTICAL
(TV)
REMO
AUDIO 1
CONPONENT VIDEO VIDEO
P R P B Y
IN
AV 1
OUT
AUDIO 1 (OPTICAL) jack
COAXIAL
OPTICAL
AV 2
(TV) O
GND
AUDIO 1
AUDIO 2 PHONO AV 3 AV 4
• You do not make a digital optical cable connection between the TV and the unit in the following cases:
– If your TV supports Audio Return Channel (ARC)
– If you will receive TV broadcasts only from the set-top box
• If you connect a TV that supports HDMI Control to the unit with an HDMI cable, you can control the unit's
power and volume with the TV's remote control.
To use HDMI Control and ARC, you need to configure the HDMI settings on the unit. For
details on the settings, see "Information on HDMI" (p.141).
About Audio Return Channel (ARC)
• ARC allows audio signals to travel both ways. If you connect a TV that supports ARC to the unit with a
single HDMI cable, you can output video/audio to the TV or input TV audio to the unit.
• When using ARC, connect a TV with an HDMI cable that supports ARC.
HDMI input
HDMI
HDMI
OPTICAL
O
TV
Audio output
(digital optical)
22
En