Normal Mode With Triple Watch Or Dual Watch; Scan Mode Operation - PRESIDENT PM-2050 SWF Owner's Manual

Normal mode with Triple Watch or Dual Watch

If you activate Triple Watch while operating in Normal mode, the radio checks
channels 16 and 9 every two seconds; with Dual Watch turned on, the radio
only checks channel 16. The radio will not check channels 16 or 9 while you
are actively transmitting; it waits until your transmission is finished and then
checks the channels.

Scan Mode Operation

You can save channels into memory and then use Scan mode to monitor those
channels from lowest to highest. If the radio detects a signal on a channel, it
stays on that channel as long as the signal is received; when the signal stops,
the radio continues scanning.
13