Tuner Section - Sony XR-CA360 Service Manual

TAPE SPEED ADJUSTMENT
Setting:
test tape
WS-48A
(3 kHz, 0 dB)
4 Ω
set
speaker out terminal
Procedure:
1. Put the set into the FWD PB mode.
2. Adjust adjustment resistor for inside capstan motor so that the
reading on the frequency counter becomes in 3,015 Hz.
Specified Value: 2,940 to 3,090 Hz
Adjustment Location: DC motor

TUNER SECTION

Tuner section adjustments are done automatically in this set.
Adjustment Location: PB head
– Set Upper View –
frequency counter
+
–
FWD


adjustment

screws

REV

Adjustment Location: DC motor
– Set Upper View –
Tape Speed Adjustment
XR-CA360/CA360X
13