Sony XR-CA360EE Operating Instructions Manual
Sony XR-CA360EE Operating Instructions Manual

Sony XR-CA360EE Operating Instructions Manual

Fm/am cassette car stereo
Hide thumbs Also See for XR-CA360EE:

Advertisement

Available languages

Available languages

Quick Links

FM/AM
Cassette Car
Stereo
Operating Instructions
For installation and connections, see the supplied installation/connections
manual.
XR-CA360EE
2003 Sony Corporation
3-257-689-11 (1)
GB
RU

Advertisement

Table of Contents
loading

Summary of Contents for Sony XR-CA360EE

  • Page 1 3-257-689-11 (1) FM/AM Cassette Car Stereo Operating Instructions For installation and connections, see the supplied installation/connections manual. XR-CA360EE 2003 Sony Corporation...
  • Page 2 Precautions Welcome ! •If your car was parked in direct sunlight Thank you for purchasing this Sony Cassette Player. resulting in a considerable rise in temperature inside the car, allow the unit to cool off before operating it. In addition to the cassette playback and radio operations, you can expand your system by •If no power is being supplied to the unit,...
  • Page 3: Notes On Cassettes

    Cassettes longer than 90 minutes Notes on Cassettes The use of cassettes longer than 90 minutes is not recommended except for long continuous play. The tape used for these cassettes is very Cassette care thin and tends to stretch easily. Frequent •Do not touch the tape surface of a cassette, as playing and stopping of these tapes may cause any dirt or dust will contaminate the heads.
  • Page 4: Table Of Contents

    Table of Contents With Optional Equipment This Unit Only Location of controls ..........5 CD/MD Unit Playing a CD or MD ......... 12 Getting Started Playing tracks repeatedly — Repeat Play ..........13 Resetting the unit ..........6 Playing tracks in random order Detaching the front panel ........
  • Page 5: Location Of Controls

    SOURCE SEEK MODE DSPL DISC SHUF RELEASE SENS XR-CA360EE Refer to the pages listed for details. qd ATT (attenuate) button 10 1 SOURCE (Radio/CD/MD) button 8, 9, 11, 12 qf Number buttons 10, 12 2 MODE button During radio reception:...
  • Page 6: Getting Started

    Attaching the front panel Attach part A of the front panel to part B of Getting Started the unit as illustrated and push the left side into position until it clicks. Resetting the unit Before operating the unit for the first time, or after replacing the car battery or changing the connections, you must reset the unit.
  • Page 7: Setting The Clock

    Setting the clock Cassette Player The clock uses a 24-hour digital indication. Example: To set the clock to 10:08 Press (DSPL) for 2 seconds. Listening to a tape Insert a cassette. Playback starts automatically. The hour indication flashes. 1 Press either side of the volume button to set the hour.
  • Page 8: Radio Reception During Fast-Forwarding Or

    Radio reception during Radio fast-forwarding or rewinding of a tape — Automatic Tuner Activation (ATA) Storing stations When fast-forwarding or rewinding with the automatically m or M button, the radio will turn on automatically. — Best Tuning Memory (BTM) During playback, press (BTM) (ATA) repeatedly until “ATA-ON”...
  • Page 9: Storing Only The Desired Stations

    If you cannot tune in a preset Storing only the desired station — Automatic tuning/Local Seek Mode stations Automatic tuning: You can preset up to 18 FM stations (6 each for Press either side of (SEEK) to search for FM1, 2, and 3), up to 12 AM stations (6 each for the station.
  • Page 10: Other Functions

    Changing the sound and Other Functions display settings The following items can be set: •A.SCRL (Auto Scroll)* (page 12). Adjusting the balance and •M.DSPL (Motion Display) – the demonstration mode which appears fader when the tape is ejected and no source is selected (e.g., tuner is turned off).
  • Page 11: Setting The Equalizer

    Adjusting the equalizer curve Setting the equalizer You can store and adjust the equalizer settings for different tone ranges. — EQ3 Press (SOURCE) to select a source (Radio, CD or MD) or insert a cassette. You can select an equalizer curve for 7 music types (XPLOD, VOCAL, CLUB, JAZZ, NEW AGE, ROCK, CUSTOM, and OFF (equalizer Press (EQ3) repeatedly to select the...
  • Page 12: With Optional Equipment

    Automatically scrolling a display With Optional Equipment item — Auto Scroll CD/MD Unit If the disc name, artist name, or track name on a CD TEXT disc or MD exceeds 8 characters and the Auto Scroll function is on, information This unit can control external CD/MD units.
  • Page 13: Playing Tracks Repeatedly

    Locating a specific track Playing tracks repeatedly — Automatic Music Sensor (AMS) — Repeat Play During playback, press either side of (SEEK) momentarily for each track you You can select: want to skip. •REP-TRACK – to repeat a track. •REP-DISC – to repeat a disc. To locate succeeding tracks During playback, press (3) (REP) SEEK...
  • Page 14: Additional Information

    If the fuse blows again after replacement, there may be an internal malfunction. In such a case, Main unit consult your nearest Sony dealer. Fuse (10 A) Back of the front panel Notes • For safety, turn off the engine before cleaning the connectors and remove the key from the ignition switch.
  • Page 15: Removing The Unit

    Removing the unit Remove the protection collar. 1 Detach the front panel (page 6). 2 Engage the release keys together with the protection collar. Orient the release key correctly. 3 Pull out the release keys to remove the protection collar. Remove the unit.
  • Page 16: Specifications

    Specifications Cassette player section General Tape track 4-track 2-channel stereo Outputs Audio output Wow and flutter 0.13 % (WRMS) Power aerial relay control Frequency response 30 – 15,000 Hz lead Signal-to-noise ratio 55 dB Power amplifier control lead Inputs BUS control input terminal Tuner section BUS audio input terminal Tone controls...
  • Page 17: Troubleshooting Guide

    Troubleshooting guide The following checklist will help you remedy the problems you may encounter with your unit. Before going through the checklist below, check the connections and operating procedures. General Cause/Solution Problem No sound. •Cancel the ATT function (page 10). •Set the fader control to the center position for 2-speaker systems.
  • Page 18 When an error occurs during playback of a CD or MD, the disc number of the CD or MD does not appear in the display. The disc number of the disc causing the error appears in the display. If the above-mentioned solutions do not help improve the situation, consult your nearest Sony dealer.
  • Page 23 SOURCE SEEK MODE DSPL DISC SHUF RELEASE SENS XR-CA360EE (OFF) (OFF)
  • Page 24 Примечания Примечание (OFF) (RELEASE) (OFF) (RELEASE) Примечания...
  • Page 25 (DSPL) (SEL) Совет (DSPL)
  • Page 26 — — (BTM) (SOURCE) (SOURCE) (MODE) (MODE) (BTM) Примечания •...
  • Page 27 (SEEK) (SEEK) (SOURCE) (MODE) (SENS) (SEEK) Совет Примечание (SEEK) (SENS) (SOURCE) (MODE)
  • Page 28 (SEL) (SEL) (SEL) (SEL) (SEL) (SEL) (SEL) (ATT) (ATT)
  • Page 29 (SOURCE) (EQ3) (SEL) (SOURCE) (SEL) (EQ3) (EQ3) (SEL) Пpимeчaниe...
  • Page 30 (DSPL) (SOURCE) (SEL) Примечание (MODE) Совет (SOURCE) (MODE) (DSPL)
  • Page 31 — (SEEK) — SEEK REP-TRACK t REP-DISC t REP-OFF — (SEEK) SEEK — SHUF-DISC t SHUF-CHGR t SHUF-ALL* t SHUF-OFF...
  • Page 32 (RELEASE)
  • Page 35 (OFF) (OFF)
  • Page 36 NO MAG NO DISC ERROR BLANK RESET NOT READY HI TEMP Sony Corporation Printed in Malaysia...

Table of Contents