Adjusting The Focus And Zoom; Switching The Picture Mode; Adjusting The Image; Switching Off The Projector Automatically - Panasonic PT-AE1000E Operating Instructions Manual

Adjusting the focus and zoom

You can adjust the focus and zoom of the
projected image. Press the LENS button to

Switching the picture mode

You can switch the preset picture mode
settings by pressing the PIC. MODE
button. Press the button until the required
setting is selected. See "PICTURE MODE"
on page 31.

Adjusting the image

You can display one of the PICTURE or
ADVANCED menu items by pressing the
PICTURE ADJUSTMENT button. Press
the button to switch between PICTURE
and ADVANCED menu. Press F G to
select the required menu item and I H to
adjust.
PICTURE menu items
PICTURE MODE, CONTRAST, BRIGHTNESS,
COLOUR, TINT, SHARPNESS, COLOUR
TEMPERATURE and DYNAMIC IRIS

Switching off the projector automatically

You can switch off the POWER
automatically by setting the SLEEP
feature. Press the SLEEP button several
times to cycle through the duration of time.
See "SLEEP" on page 39.

Loading a saved setting

You can access saved settings instantly.
See "MEMORY LOAD" on page 33.
1.Select the required setting from
MEMORY1 - 5.
Undefined setting will not be displayed.
2. Press ENTER to activate the selected setting.
Remote control operation
display the LENS control menu. See "LENS
CONTROL Menu" on page 37.
NORMAL
DYNAMIC
COLOUR1
COLOUR2
ADVANCED menu items
GAMMA, CONTRAST, BRIGHTNESS, NR,
MPEG NR, CINEMA REALITY and TV-SYSTEM
NOTE:
For each menu items description, see "PICTURE
Menu" on page 31.
The screen will be cleared after 7 seconds without
any operation.
OFF
60MIN.
90MIN.
120MIN.
NOTE:
If you have not saved any settings, MEMORY1 - 5
will not be displayed.
CINEMA3
CINEMA2
CINEMA1
240MIN.
210MIN.
180MIN.
150MIN.
E - 25
NGLISH