Position Menu; H - Position; Position; Dot Clock - Panasonic PT-AE1000E Operating Instructions Manual

Hide thumbs Also See for PT-AE1000E:
Table of Contents

Advertisement

POSITION Menu

H - POSITION

You can move the projected image horizontally for fine
adjustment.
Move
left
V - POSITION
You can move the projected image vertically for fine
adjustment.
Move
down
34 - E
NGLISH
See "Navigating through
the MENU" on page 28.
Move
right
Move
up

DOT CLOCK

If you have interference patterns on the projected
image, which is sometimes referred to as moire or
noise, you can minimise it by pressing I H to adjust the
clock frequency.
NOTE:
If the projecting signal's dot clock frequency is
higher than 150 MHz, the adjustment may not
make a difference.

CLOCK PHASE

If you require further adjustment for the same reason as
the DOT CLOCK adjustment, you can fine adjust the
timing of the clock. Press I H to adjust.
NOTE:
If the projecting signal's dot clock frequency is
higher than 150 MHz, the adjustment may not
make a difference.
CLOCK PHASE is available with PC signals, and
1 125 (1 080)/50i, 1 125 (1 080)/60i,
1 125 (1 080)/50p, 1 125 (1 080)/60p,
1 125 (1 080)/24p, 750 (720)/50p and
750 (720)/60p signals of COMPONENT
connection.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents