Control Commands - Panasonic PT-AE1000E Operating Instructions Manual

Hide thumbs Also See for PT-AE1000E:
Table of Contents

Advertisement

Control commands

Command
Control contents
PON
Power ON
POF
Power OFF
IIS
INPUT
OMN
MAIN
OEN
ENTER
OBK
RETURN
OCU/OCD/
Navigation buttons
OCL/OCR
OLE
LENS CONTROL
OST
DEFAULT
OFZ
FREEZE
OOT
SLEEP
OSH
SHUTTER
OVM
PICTURE
OWM
WAVEFORM
VS1
ASPECT
VPM
PICTURE MODE
In standby mode, all commands other than the PON command are
ignored.
The PON command is ignored during lamp ON control.
If a PON command is received while the cooling fan is operating after
the lamp has switched off, the lamp is not turned back on again straight
away in order to protect the lamp.
Parameter: (page 23)
VID = VIDEO IN
RG1 = PC IN
YUV = COMPONENT IN
Displaying Main menu.
Activating the selected items in menu mode.
Returning to the previous menu or escaping from the menu mode.
OCU = F button
OCD = G button
Activating the LENS CONTROL menu.
Resetting to the factory default setting. (page 22)
Freezing the projected screen.
Parameter:
0 = OFF
Setting the duration of time to turn off the power automatically.
0 = OFF
1 = 60 min.
5 = 180 min.
6 = 210 min. 7 = 240 min. (page 25)
Turning off the projection temporarily.
Send the command to switch between ON and OFF.
Do not send the command consecutively.
Activating the PICTURE menu. Send the command to switch menu items.
(page 28)
Activating the WAVEFORM.
Parameter:
0 = OFF
1 = FULL SCAN (Y)
2 = FULL SCAN (R)
3 = FULL SCAN (G)
4 = FULL SCAN (B)
Switch the aspect ratio. (page 23)
Parameter: (page 25)
NAT=COLOUR1
DYN=DYNAMIC
CN2=CINEMA2
VID=COLOUR2
Technical Information
Remarks
SVD = S-VIDEO IN
HD1 = HDMI1 IN
HD2 = HDMI2 IN
SCT = SCART IN
OCL = I button
OCR = H button
1 = ON
2 = 90 min.
3 = 120 min. 4 = 150 min.
(page 24)
5 = SINGLE LINE SCAN (Y)
6 = SINGLE LINE SCAN (R)
7 = SINGLE LINE SCAN (G)
8 = SINGLE LINE SCAN (B)
NOR=NORMAL
CN1=CINEMA1
CN3=CINEMA3
E
- 47
NGLISH

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents