Before Replacing The Lamp Unit; When To Replace The Lamp Unit; Replacing The Lamp Unit - Panasonic PT-AE1000E Operating Instructions Manual

Hide thumbs Also See for PT-AE1000E:
Table of Contents

Advertisement

Care and Replacement

Before replacing the Lamp unit

Ensure the projector is switched off.
Unplug all the cables from the projector.
Prepare a Phillips-head screwdriver.
Contact an Authorised Service Centre to purchase a replacement Lamp unit (ET-LAE1000).
NOTE:
Prior to replacing the lamp unit, allow it to cool down to prevent the risk of burns, damage and other hazards.
Do not attempt replacement with an unauthorised lamp unit.

When to replace the Lamp unit

The Lamp unit is consumable and the brightness decreases by duration of usage. The LAMP indicator will alert
you of the replacement timing at 1 800 hours, and at 2 000 hours, the projector will be turned off. 1 800 or
2 000 hours is a rough guidance and might be shortened by the usage conditions, characteristics of the lamp unit,
environmental conditions, and so on. You can check the duration of usage time using LAMP RUNTIME in the
OPTION menu.
Indication
Over 1 800 hours
Over 2 000 hours
NOTE:
The guide times, 1 800 and 2 000 hours, are rough estimates based on certain conditions and is not a
guaranteed time. The estimated condition is: LAMP POWER in OPTION menu set to NORMAL.
To prolong the lamp life, set the LAMP POWER in OPTION menu to ECO - MODE. See "LAMP POWER" on
page 39.
For more information about the Lamp unit, such as guaranteed time, see the "Replacement Instructions"
provided with the Lamp unit.

Replacing the lamp unit

Opening the top cover
1. Turn off the MAIN POWER switch according to the
procedure "Switching the projector on/off" on
page 19 and disconnect the mains plug from the
mains socket.
Make sure the Lamp unit and the surroundings
are cooled enough.
2. Open the top cover of the projector and remove
aside. See "Back and bottom view" on page 13.
Hold the top cover up and press one of the
buttons of the hinge parts each to remove.
42 - E
NGLISH
On screen
REPLACE LAMP
"REPLACE LAMP" is displayed on the upper left of the
screen for 30 seconds.
To clear the screen immediately, press any button.
"REPLACE LAMP" is displayed on the upper left of the
screen, and until you respond it will stay.
To clear the screen, press any button.
LAMP indicator
Illuminates RED
Press here
Press here

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents