Table of Contents
Advertisement
T-19WX
StarBoard
Stylus pen-related problems
In this case
Stylus pen does not operate. StarBoard Software may be
Stylus pen tip and pen
cursor positions do not
match.
Check this
damaged or may not be
installed correctly.
Is battery worn out?
Is pen tip worn down?
Are there any electronic
devices located nearby the
StarBoard such as
microwave ovens or radio
transmitters that emit
electromagnetic noise?
Other
Did you calibrate the pen
position correctly?
Other
3-2
And do this
Uninstall StarBoard Software, and
then reinstall. (For details on how to
install StarBoard software, see
"StarBoard Software Installation " in
StarBoard Software Installation
Guide)
Replace stylus pen battery.
(For details on how to change the
battery, see "2.2.4 Changing the
Battery in the Stylus Pen" on page 2-5
of this User's Guide.)
Check if the pen tip is worn down or
is too short.
(For details on how to replace the
stylus pen tip, see "2.2.5 Replacing
the Stylus Pen Tip" on page 2-6 of this
User's Guide.)
This product is susceptible to
electromagnetic noise, so use the
StarBoard away from devices that
emit noise.
Restart Windows / Mac OS and
StarBoard Software.
Contact technical support.
Calibrate the pen position correctly.
(For details on how to calibrate the
pen, see "Calibration" in the
StarBoard Software Installation
Guide)
Contact technical support.
Appendix
English
Advertisement
Table of Contents
