Page 1
VT‐M2M‐Ruban User’s Manual Vantron Technology, Ltd www.vantrontech.com All Rights Reserved...
Page 2
M2M-Ruban Revision History: No. Version Description Date 1 V1.0 First release Oct.10, 2014 Update the default DDR memory to 1 V1.1 Feb 3, 2015 512MB for Moon Island usage 1:Update the order code 2 V1.2 2:Add the Ethernet interface Feb.04.2015 describe ...
Vantron reserves all rights of this manual, including the right to change the content, form, product features, and specifications contained herein at any time without prior notice. The latest version of this manual is at www.vantrontech.com.cn. Please contact Vantron for ...
The trademarks and registered trademarks in this manual are properties of their respective owners. No part of this manual may be copied, reproduced, translated or sold. No changes or other purposes are permitted without the prior written consent of Vantron. Vantron reserves the right of all publicly‐released copies of this manual. 1.2 Notes Applicable notes are listed in the following table: ...
M2M-Ruban 1.5 Limitation of Liability/Non‐warranty For direct or indirect damage to this device or other devices of Vantron caused by failure of conforming to this manual or the safety instructions on device label, Vantron assumes neither warranty nor legal liability even if the device is still under warranty. 1.6 Safety Instructions Keep and comply with all operation instructions, warnings, and ...
M2M-Ruban 1.7 Precautions Pay attention to the product labels/safety instructions printed on silk screens. Do not try repairing this product unless declared in this manual. Keep away from heat source, such as heater, heat dissipater, or engine casing. Do not insert other items into the slot (if any) of this device. • Keep the ventilation slot ventilated for cooling. •System fault may arise if other items are inserted into this device. Installation: ensure correct installation according to instructions from the manufacturer with recommended installation tools. ...
1.8 Safety Instructions for Power Cables and Accessories Proper power source only Start only with power source that satisfies voltage label and the voltage necessary according to this manual. Please contact technical support personnel of Vantron for any uncertainty about the requirements of necessary power source. Use tested power source This product still contains a button lithium battery as a real‐time clock after its external power source is removed and therefore should not be short‐circuited during transportation or placed under high temperature. ...
Page 10
Clean with a damp cloth. Do not try cleaning exposed electronic components unless with a dust collector. Support for special fault: Power off and contact technical support personnel of Vantron in case of the following faults: The device is damaged. The temperature is excessively high. Fault is still not solved after the operation according to the ...
Vantron’s M2M products are based on the most advanced ARM and Intel Atom processors and have low‐power consumption and high integration. The products are designed for applications of M2M in ...
M2M-Ruban 3.4.2 Ethernet Interface Standard RJ45 interface, supporting 10M/100M self‐adaptation, this is a standard RJ45 ethernet port Pin Description Remarks IO 1 TDP 2 TDN IO 3 RDP IO 4 NC 5 NC 6 RDN IO 7 NC 8 NC NOTE: Green LED of RJ45 is the LED_LINK pin, in Mode 2(Default mode) will be ON to indicate Link is good and BLINK to indicate activity is present on either transmit or receive activity Yellow LED of RJ45 is the LED_ACT/COL pin, In Mode...
M2M-Ruban 3.4.5 LED PWR LED: light system power OK(main power up);off system power turn off Status LED:Blink SATA HDD active. 3.4.6 USB Host Connector Dual vertical USB A type interface, USB2.0 Description Pin USB1_VCC(+5VDC) A1 USB1_D‐ A2 USB1_D+ A3 USB1_DGND(ground pin) A4 ...
M2M-Ruban 3.5 Operation Notice 3.5.1 Change SIM Card Push the small button on the left of SIM Card Holder, and install the SIM card to the holder. Then push the holder into the Slot. 3.5.2 Power Supply Please make sure using adapter in the accessory, or the power is not reversed when powered by other adapter. 22 / 27...
M2M-Ruban Tips Waste Disposal It is recommended to disassemble the device before abandoning it in conformity with local regulations. Please ensure that the abandoned batteries are disposed according to local regulations on waste disposal. Do not throw batteries into fire (explosive) or put in common waste canister. Products or product packages with the sign of “explosive” should not be disposed like household waste but delivered to specialized ...
Page 26
Unauthorized changes to this product or its components are prohibited. In the aim of avoiding accidents as far as possible, it is not allowed to replace the system or change components unless with permission and certification. Please contact the technical department of Vantron or local branches for help. Pay attention to caution signs. Caution signs in this manual remind of possible danger. Please comply ...
Page 27
M2M-Ruban Notice Considering that reasonable efforts have been made to assure accuracy of this manual, Vantron assumes no responsibility of possible missing contents and information, errors in contents, citations, examples, and source programs. Vantron reserves the right to make necessary changes to this manual without prior notice. No part of this manual may be reprinted or publicly released in forms of photocopy, tape, broadcast, e‐document, etc. FCC Warning This device complies with FCC class B Rules. Operation is subject to the ...
Page 28
M2M-Ruban —Consult the dealer or an experienced radio/TV technician for help. Any modification to the product is not permitted unless authorized by Vantron. It’s not allowed to disassemble the product, it is not allowed to replace the system or change components unless with permission and certification. Please contact the technical support department of Vantron or local branches for help. IC statement Disclaimer: Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference ...
Page 29
M2M-Ruban US Office: Vantron Technology, Inc. Address: 1292 Kifer Road #807, Sunnyvale, CA 94086 Tel: 510-304-7666 Email: sales@vantrontech.com China Office: Chengdu Vantron Technology,Ltd Address: 3rd floor, 3rd building, No.9, 3rd WuKe East Street, WuHou District, Chengdu, P.R. China 610045...