Page 1
6V BMW Motorcycle Owner’s Manual and Assembly Instructions Model #: W348AC Read and understand the entire manual before assembly and operation. The vehicle must be assembled by an adult who has read and understands the instructions. Made in China. Styles and colours may vary. Do not return to store. Call 1-888-982-9309 for assistance and replacement parts.
Page 2
Introduction Thank you for purchasing this RollPlay vehicle from Aria Child. We hope the rider enjoys it for miles to come. Please read this instruction guide carefully before assembling and operating the vehicle. Please have your model number and serial number ready before calling. Please have proof of purchase.
Page 3
Call Customer Service if you need assistance or replacement parts. Please have your model number and serial number ready before calling. Please have proof of purchase. Keep your sales receipt or register your product at www.rollplay.net as we may require proof of purchase. 1-888-982-9309 Read this entire manual to ensure proper assembly and safe operation of the vehicle.
Table of Contents Safety ............6 Parts ............8 Charging Instructions .......9 Assemble the Front Wheel ......10 Assemble the Rear Fork ......11 Assemble the Rear Wheel.......12 Assemble the Support Wheels ....13 Attach the Mud Guard ......14 Attach the License Plate ......15 Assemble the Handle Bars .....16 Assemble the Windshield .......17 Assemble the Baggage Rack ....18 Attach the Exhaust Pipe ......19...
Safety WARNING: SAFETY RIDING RULES The user must follow all safety rules and guidelines, or serious injury or death may occur to the user. Always use common sense and safe practices when using the vehicle. The user must be at least 3 years old and weigh no more than 35 kg (77 lbs). This product contains small parts that are for adult assembly only.
Page 7
Safety (Continued) WARNING: BATTERY SAFETY • Battery posts, terminals and related accessories contain lead and lead compound (asic) chemicals known to the state of California to cause cancer, reproductive harm, and are toxic and corrosive. DO NOT open the battery. •...
Charging Instructions YOU MUST CHARGE THE BATTERY FOR 24 HOURS BEFORE THE FIRST USE! ONLY AN ADULT SHOULD HANDLE THE BATTERY AND CHARGER. To Charge the Battery: 1. Ensure the vehicle is stopped and turned off. 2. Unlock and remove the seat. 3.
Assemble the Front Wheel 1. Place the left (13) and right brake (15) onto either sides of the front wheel (14). 2. Slide the front wheel assembly into the front fork. 3. Align the holes on the brakes with the holes on the front fork. Insert a self tapping screw (22) into both holes on the fork to secure the wheel.
Assemble the Rear Fork 1. Align the slot on the rear wing bracket (5) with the inner side of the rear fork 2. Insert a self tapping screw (22) through the wing bracket and rear fork to secure...
Assemble the Rear Wheel 1. Insert the rear axle (30) into the left hole of the rear fork. Do not slide all the way through. 2. Slide the gear box (31) onto the rear axle. Connect the white connector on the gear box with the white engine connector.
Assemble the Support Wheels 1. Slide the left support wheel (7) onto the left side of the rear axle. 2. Slide the right support wheel (27) onto the right side of the rear axle. 3. Slide the rear shield (8) onto the left side of the rear axle. Align the slots on the rear shield with the protrusions on the left fork and snap into place.
Attach the Mud Guard 1. Align the slot on the back of the mud guard (4) with the back of the rear wing bracket (5). 2. Snap the mud guard onto the rear wing bracket.
Attach the License Plate 1. Align the top of the license plate (2) with the slot on the bottom of the back of the motorcycle body. 2. Slide the license plate onto the slot until it snaps into place.
Assemble the Handle Bars 1. Remove the screw (26) and nut (24) from the steering axle. 2. Slide the handle bars (9) onto the steering axle. Ensure the holes on the handle bars align with the holes on the steering axle. 3.
Assemble the Windshield 1. Connect the handle bar wire connector to the motorcycle body wire connector. 2. Align the windshield assembly (10) with the slots on the wire compartment and snap into place taking care not to damage the wires in the process.
Assemble the Baggage Rack 1. Using a flathead screw driver, turn the seat lock to the unlock position. 2. Remove the seat (6) by lifting on the back of the seat. 1. Align the front bar of the baggage rack (3) with the gap on the rear of the battery compartment and snap into place.
Attach the Exhaust Pipe 1. Align the top and front of the exhaust pipe (21) with the slots on the right side of the motorcycle body and snap into place. 2. Use a self-tapping screw (22) to secure.
User Information Sound Button ON/OFF Button Turn Accelerator to Move Forward 1. Battery: Charge the battery a full 24 hours before first use. Charge the battery for 8-12 hours each additional recharge. 2. ON: Press the power button on the front of the motorcycle dashboard to turn ON the motorcycle.
Maintenance Important Battery and Charger Information • Only an adult who has read and understands the safety warnings may handle and operate the battery and battery charger. Keep away from children. • Charge the battery for 24 hours before using the vehicle for the first time.
General Care • Regularly inspect all vehicle parts to ensure they are in good working condition. • Regularly inspect the charger, cord, plug, and other related parts for damage. • Remove any damaged parts and immediately contact Customer Service for replacement parts. See Service and Repairs on Page 23 for more information.
Troubleshooting Guide Completely read through the manual and troubleshooting guide before contacting Customer Service. Problem Potential Cause Solution Vehicle does not run Battery is low Recharge the battery Snap pins are loose Tighten snap pins Loose wires or loose Ensure the battery connectors connectors are securely attached.
Page 24
Problem Potential Cause Solution Vehicle needs a push to Loose wires or loose Ensure the battery connectors start connectors are securely attached. If wires are loose, contact Customer Service “Dead spot” on motor A “dead spot” means electricity is not being delivered to the terminal.
FCC Information This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Hours: 9 AM - 5 PM (CST), Monday - Friday 888-982-9309 Phone: 1- Email: customerservice@ariachild.com Web: www.rollplay.net For a list of available replacement parts, please visit www.rollplay.net WE WILL REQUIRE PROOF OF PURCHASE. Please save your sales receipt or register your product at www.rollplay.net.
• Please do not return vehicle to the store. • Consult the troubleshooting guide in this manual and online at www.rollplay.net • Call Aria Child Customer Service at 1-888-982-9309 Note: This warranty gives you specific legal rights. You may also have other rights that may vary from state to state.
City: State: Zip Code: Email: Phone: Date of Purchase: The following product information is on the cover of the owner’s manual. Product Name: Model Number: Serial Number: Retailer Place of Purchase: Questions or comments? Contact us at www.rollplay.net or 1-888-982-9309...
Need help?
Do you have a question about the W348AC and is the answer not in the manual?
Questions and answers