Setting Lighting; Activating/Deactivating Auto Answer; Adjusting The Loudspeaker Volume; Changing Ringtones - Gigaset S455 User Manual

Setting lighting

Depending on whether or not the handset
is in the base station you can set different
levels of lighting. If it is switched on, the
display is permanently dimmed.
¢ ¢
v Ð
Display
The current setting is displayed.
¤
Change multiple line input:
In Charger
Select On or Off .
without Charger
Select or .
On Off
Press the display key.
§Save§
a
Press and hold (idle status).
Note:
When the lighting is switched on, the standby
time of the handset is reduced to approx. 30
hours.

Activating/deactivating

auto answer
If you have activated this function, when
you get a call you can simply lift the hand-
set out of the base station without having
to press the talk key c.
¢ ¢
v Ð
Handset
Auto Answer
Select and press
a
Press and hold (idle status).
¢
Backlight
‰
( = on).
§OK§
Adjusting the loudspeaker
volume
You can set the loudspeaker volume for
handsfree speaking to five different levels
and the earpiece volume to three different
levels. You can only make these adjust-
ments during a call.
The handsfree volume can only be
adjusted when this function is set.
You are conducting an external call.
t
Open menu.
r
Select volume.
Press display key if necessary
§Save§
to save the setting perma-
nently.
If t is assigned a different function,
e.g. when toggling (page 13):
Open menu.
§Options§
Select and press
Volume
Configure setting (see above).

Changing ringtones

u
Volume:
You can choose between five volumes
(1–5; e.g. volume 2 = ˆ) and
the "Crescendo" ring (6; volume
increases with each ring =
‰).
u
Ringtones:
You can choose between 15 different
melodies.
You can configure the following functions
with different ringtones:
u
: for external calls
Ext. Calls
u
Internal Calls : for internal calls
u
All: the same for all functions
For how to set the ringtones for the base
station, see page 34.
Handset settings
.
§OK§
31