Setting Up The Handset For Use - Gigaset S455 User Manual

Please note:
u
The power adapter must be always
connected, as the phone will not oper-
ate without an electrical connection.

Setting up the handset for use

Inserting the batteries
Caution:
Use only the rechargeable batteries recom-
mended by Siemens (page 39). Never use con-
ventional (non-rechargeable) batteries or
other battery types as this may cause signifi-
cant damage to health and property. For
example, the outer casing of the batteries
could be destroyed or the batteries could
explode. The phone could also malfunction or
be damaged as a result of using batteries that
are not of the recommended type. Use of bat-
tery packs not authorized by Siemens may void
the warranty on this product.
¤
Fit the batteries with the correct polar-
ity (see diagram).
The polarity is indicated in/on the battery
compartment.
Closing the battery cover
¤
First align the notches on the side of
the battery cover with the clips on the
inside of the casing.
¤
Then close the cover, press on the top
so that it clicks into place.
Attaching the belt clip
There are notches for attaching the belt
clip on the side of the handset at the same
height as the display.
¤
Press the belt clip onto the back of the
handset so that the protrusions on the
belt clip engage with the notches.
Opening the battery cover
¤
If fitted, remove belt clip.
First Steps
7