Table of Contents
Advertisement
System Configuration Setup
100/100
100/133
133/100
133/133
❖
C2P Concurrency and Master - Sets CPU to PCI Concurrency and Master function.
Enabled
(default)
Disabled
❖
DRAM Integrity Mode
Non-ECC
ECC (default)
❖
AGP Mode - Determines AGP transfer speed.
4 (default)
2
1
❖
AGP Comp. Driving - This option should be set to Auto.
Auto (default)
Manual
❖
Manual AGP Comp. Driving - Determines the optimum value for the AGP card (00 to
FF, the default is CB) when "Manual" is selected on the AGP Comp. Driving option.
❖
AGP Aperature Size - Sets a AGP memory size. Select from 4 to 256 MB (64 MB is
the default).
❖
USB Controller - Select the USB Port 0&1 option.
❖
USB Legacy Support - Select Disabled.
System bus 100 MHz, DRAM 100 MHz.
System bus 100 MHz, DRAM 133 MHz
System bus 133 MHz, DRAM 100 MHz
System bus 133 MHz, DRAM 133MHz
Enables CPU to PCI Concurrency and
Master function.
Disables CPU to PCI Concurrency and
Master function.
For 64-bit standard type DIMM module
For 72-bit ECC type DIMM module
AGP 4X speed.
AGP 2X speed.
AGP 1X speed.
Automatically sets the AGP driving
performance.
Manually set the AGP driving performance.
78
Setup
Advertisement
Table of Contents
