TROUBLESHOOTING
If your system is not operating properly, please refer to the following information.
Problem
Power indicators not
lighting up
No video displayed on
display
Correction
• Check if the power plugs of transmitter/receiver are properly
inserted into a functioning power outlet.
First steps
• Check the HDMI connection on the Tx
• Check the HDMI cable on the RX
• Select the HDMI as input source on source
• Check the POWER and INFO lights on Rx
Power LED flashing blue
OSD displayed
• Ensure the transmission range is correct.
POWER LED solid blue + slow flashing SOURCE LED
OSD displayed
• Check video resolution and frame rate on source and adjust.
• Connect source directly to display to check it works.
POWER LED solid blue + STATUS LED flashing quickly
OSD displayed
• Tx is plugged in to source device properly and powered on.
• Check display setting for your PC have been set to clone mode,
Projector out mode or dual display mode to enable external
display.
(4 levels looping)
13
TC2-HDMIW20_manual_en