Status Indicators - Vision TECHCONNECT TC2-HDMIW20 Owner's Manual

INFO
Press INFO button on remote control to see on screen display:
• Signal Quality
• Source
• Channel
• Resolution
NOTE: The status of the Tx HDMI output cannot be displayed on the on screen display.
Press INFO button again to turn on screen display off.

STATUS INDICATORS

Standby
Power saving
Boot up 15~20 seconds for
system boot up.
Searching If system can't
available
establish link over 80s
channels after initialization.
Wireless
No input from selected
linked
source
Mode
Video format not
recognized
Video format
recognized
Rx Power Rx Status
LED
Solid Red
Flashing Flashing
Blue
Flashing Flashing
Blue
Solid Blue Flashing
(Quickly)
Solid Blue Flashing
(Slowly)
Solid Blue Solid Blue
Rx OSD Display
LED
off
-
TC2-HDMIW20_manual_en
10