Table of Contents
Advertisement
OPERATION
1.
CHECK REMOTE CONTROL Ensure the 2 x AAA batteries are loaded into the remote
control.
2.
TURN POWER ON When mains power is turned on the Tx and Rx will automatically turn
on.
They can be powered on in any order
•
If both in standby both need to be turned on manually
•
3.
TURN POWER OFF
•
Pressing Rx or Remote control power button turns Rx off, but leaves Tx on so
that the pass-through on Tx continues to work.
Pressing Tx power button will turn both off.
•
As soon as they are both on the blue power light will flash for 15-20 seconds while the link is
established, then it will stay on.
NOT WORKING?
If you don't have an image ensure:
1.
Even when there is no link an on screen display will be output from the receiver.
2.
The computer is set to duplicate or extend the desktop (Control Panel\Appearance and
Personalisation\Display\Screen Resolution)
3.
Change source on Tx
ON
OFF
9
TC2-HDMIW20_manual_en
Advertisement
Table of Contents
