TABLE OF CONTENTS GENERAL SAFETY GENERAL INFORMATION I. UNPACKING II. FEATURES III. REMOTE CONTROL UNIT (RCU) IV. HOW TO SETTING RCU FOR TV V. FRONT PANEL VI. REAR PANEL INSTALLING EQUIPMENT CHANNEL LIST GUIDE MENU GUIDE MAIN PAGE I. CHANNEL MANAGER II.
GENERAL SAFETY WARNING Please read the following recommended instructions carefully to avoid the risk of your physical Injury before the product is operated. Do not cover the receiver and keep clear space around the receiver for sufficient. Check the receiver’s operation voltage 90~250V, 50Hz~60Hz Max, 40W Keep liquid away from the receiver.
GENERAL INFORMATION I. UNPACKING Please ensure that the following items are included with the receiver in your pack- ing. 1) Remote Control Unit (RCU) 2) Batteries (2EA) 3) User’s Manual 4) A/V Cable II. FEATURES Supports MPEG-2, MPEG-4, H.264 and fully DVB compliant. Satellite receiver.
GENERAL INFORMATION III. REMOTE CONTROL UNIT (RCU)
Page 7
GENERAL INFORMATION III. REMOTE CONTROL UNIT (RCU) 1. MUTE Enables or disables the audio. 2. POWER Swithches the receiver between operation and standby mode. 3. TV TV mode. 4. STB STB mode. 5. VCR VCR mode. 6. DVD DVD mode. 7.
GENERAL INFORMATION IV. HOW TO SETTING RCU FOR TV...
Page 9
GENERAL INFORMATION IV. HOW TO SETTING RCU FOR TV 1. Manual Search At first, Turn on the TV "OK" key "TV LED Lamp" 1) Press in RCU at the same time for more than 2 or 3 seconds. "TV LED Lamp" Then the will turn on/off 2 times ( will be twinkled 2 times ).
GENERAL INFORMATION V. FRONT PANEL 1. POWER Switches the receiver power On and Standby. 2. CH Up/Down Channel up / down or selects the item of Menu. 3. VOL Up/Down Volume up/down or selects the item of Menu. 4. SMART SLOT Insert Smart Card.
GENERAL INFORMATION VI. REAR PANEL 1. SAT IN Connects to Satellite antenna cable. 2. LOOP OUT Connects to another STB. 3. YPbPr Connects to Component jack of TV. 4. VIDEO Connects VIDEO to the TV or other eguipment. 5. TV SCART Connects to TV SCART cable.
INSTALLING EQUIPMENT This section explains several ways of connecting the receiver to your existing TV, VCR and Hi-Fi system. You can choose one of the following setups that we recommend. If you have any problem or need help, consult your dealer or service provider. Please ensure that the following items are included with the receiver in your packing.
CHANNEL LIST GUIDE 1. Normal Live Mode a) When you select one channel, information bar appears automatically on the screen for few seconds. This bar provides you the current channel information. b) Press INFO button to see the information during normal live mode.
Page 14
CHANNEL LIST GUIDE 4.EPG (Electronic Program Guide) a) Press EPG button on the live mode. b) EPG of the current channel appears on the screen. c) Select the channel that you want to watch program. d) It will be appear like rightside picture. 5.
MENU GUIDE MAIN PAGE Press the MENU button on the RCU to open Main Page on the screen. Main Page will be displayed. 1. You can move into the main page using on the RCU. 2. Press OK to confirm your selection. 3.
Page 16
MENU GUIDE I. CHANNEL MANAGER I-2. Rename 1. Using go to the Rename mode. 2. Select the channel that you want to rename using and then press OK. 3. Keypad Dialog displays on the screen. 4. Edit the name entering NUMBERS and / or WORDS in the Keypad Dialog.
MENU GUIDE II. INSTALLATION This section may help you to set up antenna and scan satellite or transponder, etc. Select Installations in Main Page using and press OK. Press EXIT to return to the previous menu or press MENU to go to the current live channel. II-1.
Page 18
MENU GUIDE II. INSTALLATION II-2. DiSEqC Switch 1. Select Channel Search in Installation using and press OK. a) If you select DiSEqC Switch and press OK on the menu will be, DiSEqC Switch Page will be dis- played. b) Select the proper Satellite of each DiSEqC port (A~D) using and and press SEARCH.
Page 19
MENU GUIDE II. INSTALLATION f) Motor Control Select the position using and then press OK. Message box displays on the screen. - Store Sat position : Stores the current position of the motor for the selected satel- lite. - Goto Sat Position : Moves the motor to the stored posi- tion of the selected satellite.
Page 20
MENU GUIDE II. INSTALLATION II-4. Home Streaming 1. PC setting ***Execute 'Home Streaming' program. a) Go to ‘Preference’ Tab. b) Select ‘Default URL’ check-box and assign the download folder by using “Browse” button It is assigned to “c:\download” but must specify the destination folder personally to be able to receive movie files in PC.
Page 21
MENU GUIDE II. INSTALLATION II-5. Factory Default Use Factory Default function only when you want to return the receiver to the condition of factory default. All settings and channels will be deleted. 1. Select Factory Default in Installations using and press 2.
MENU GUIDE III. OPTIONS This section may help you to set up OSD language, time, etc. Select Options in Main Page using and press OK. Press EXIT to return to the previous menu or press MENU to go to the current live channel. III-1.
Page 23
MENU GUIDE III. OPTIONS III-2. Control Panel 1. Select TV Setup in Options using and press OK. a) HD Type - Select HD video Output. b) TV Type - Select your TV type. c) Aspect Ratio - Select screen ratio. d) Screen Control - Select screen display modes.
MENU GUIDE IV. UTILITY This section may help you to use USB, etc. Select Utility in Main Page using and press OK. IV -1. System Information IV -2. Timer IV -3. Calendar IV-1. System Information This option help you to know the current S/W and H/W version.
MENU GUIDE V. ACCESSORY This section may help you to use USB, etc. Select Utility in Main Page using and press OK. V -1. USB V -2. Common Interface -1 USB The receiver is equipped with host. 1. Select USB in Utility with and press OK. 2.
PVR GUIDE PVR GUIDE This section may help you how to use PVR function on this STB. I. Recommended Devices If you want to use PVR function, you need to prepare equipment as below. - External USB Hard Disk Drive. - Flash memory stick - Format Type: FAT16/32 (System does not support NTFS and other file system)
Page 27
PVR GUIDE PVR GUIDE II. Record Function II-2 Instant Recording - Press “RECORD button” on RCU to start recoding program. - While Recoding program - Press “PAUSE” key to execute “Time Shift” - You can use “LEFT/RIGHT button” to view desired time while recoding program.
Page 28
PVR GUIDE PVR GUIDE III. Playback Function - To play previously recorded program, press “Play button”on RCU. - Use the arrow buttons to select the file which you want to play and press “OK button” to play. - While Playing program. - If you press “LEFT/RIGHT button”...
Page 29
PVR GUIDE PVR GUIDE V. Time Shift Function - If you want to execute “Time Shift” in Live mode You should set “On” of Time Shift In PVR Option (Accessory -> PVR -> TimeShift “ON”). - To star Time Shift in Live mode, press “PAUSE” to start. - Time shift will played during 30 minutes in Live Mode.
Page 30
PVR GUIDE PVR GUIDE VII. MP3 Play - Select MP3 file which you want to play in USB menu. - After you select MP3 file, MP3 play window will be executed. VIII. JPG View - Select JPG file which you want to see in USB menu. - Press OK to see the JPG which you want to.
Page 31
PVR GUIDE PVR GUIDE X. How to play the record by PVR of 'HD-XXX' in PC or Divx Player X-1 How to play in PC A) Play KM Player. B) Select Language. 1) Click right button of Mouse -> Language > your language.
Page 32
PVR GUIDE PVR GUIDE X-3 How to Convert the file by Divx Manager A) Play Divx Manager. 1) Setting -> Model ->Rapsody RSH-250/350 B) Select the folder where the file that you want to convert is. Then the file's information will appear. C) And select the file which you want to convert and select “Convert”.
TROUBLESHOOTING Solution Problem Check that the power cable is plugged into the power sock- Nothing appears on the Front Panel or No power supply Check the dish and adjust it. No Picture Check the cable connection and correct it. Check channel and video output. Check the volume level of the TV and receiver.