Setup Menu; How To Enter The Setup Menu To Change Settings; User System Settings Table - Aprilaire 8910W Owner's Manual

SETUp MENU

HOW TO ENTER THE SETUp MENU TO CHANGE SETTINGS

press [MENU] to enter the main menu .
press [SETUp] to enter the setup menu .
press [Next] or [back] to page through the settings
(the setting is displayed in the message center) .
MESSAGE CENTER
(SCROLLING TEXT)
34
press or to adjust the setting. (Selected option
flashes .)
Press [DONE] to save and exit, or [CANCEl] to exit
without saving .
The Home comfort control will discard changes and exit
if nothing is pressed within 60 seconds .
SETUp MENU

USER SySTEM SETTINGS TAblE

The following table is the list of the settings and their details. Default settings are shown in bold .
User system
setting Description
Temperature Set the thermostat to Fahrenheit or Celsius mode .
Scale
Lockout Type Sets the screen lockout level . Setting the Lockout Type to Full
will prevent any changes from being made at the thermostat.
Setting the Lockout Type to Partial allows individual functions
to be locked out at the thermostat. Set this to None to disable
the lockout feature . Note: The thermostat can be unlocked by
holding the [MENU] button for 7 seconds.
Mode Lockout Prevents changes to the system mode from being made at the
thermostat . Note: Only available when the Lockout Type is set
to Partial.
Fan Lockout Prevents changes to the fan mode from being made at the
thermostat . Note: Only available when the Lockout Type is set
to Partial.
Dehum Lockout Prevents changes to the dehumidification setpoint from being
made at the thermostat . Note: Only available when the Lockout
Type is set to Partial.
Factory default setting
(bold) and setting range
Fahrenheit
Celsius
None
Partial
Full
Disable
Enable
Disable
Enable
Disable
Enable
35