Setup Menu; How To Enter The Setup Menu To Change Settings; User System Settings Table - Aprilaire Home Comfort Control 8830 Owner's Manual

SETUP MENU

HOW TO ENTER THE SETUP MENU TO CHANGE SETTINGS

Press [MENU] to enter the main menu .
Press [SETUP] to enter the setup menu .
Press [Next] or [Back] to page through the settings
(the setting is displayed in the message center) .
MESSAGE CENTER
(SCROLLING TEXT)
36
Press or to adjust the setting . (Selected option
flashes .)
Press [DONE] to save and exit, or [CANCEL] to exit
without saving .
The Home Comfort Control will discard changes and exit
if nothing is pressed within 60 seconds .
SETUP MENU

USER SYSTEM SETTINGS TABLE

The following table is the list of the settings and their details . Default settings are shown in bold .
User system
setting Description
Temperature Set the Home Comfort Control to Fahrenheit or Celsius mode .
Scale
Lockout Type Sets the screen lockout level . Setting the Lockout Type to Full will
prevent any changes from being made at the Home Comfort Control .
Setting the Lockout Type to Partial allows individual functions
to be locked out at the Home Comfort Control . Set this to None
to disable the lockout feature . Note: The Home Comfort Control
can be unlocked by holding the [MENU] button for 7 seconds .
Mode Lockout Prevents changes to the system mode from being made at the
Home Comfort Control . Note: Only available when the Lockout
Type is set to Partial .
Fan Lockout Prevents changes to the fan mode from being made at the Home
Comfort Control . Note: Only available when the Lockout Type is
set to Partial .
Dehum Lockout Prevents changes to the dehumidification setpoint from being
made at the Home Comfort Control . Note: Only available when
the Lockout Type is set to Partial and dehumidification installed .
Factory default setting
(bold) and setting range
Fahrenheit
Celsius
None
Partial
Full
Disable
Enable
Disable
Enable
Disable
Enable
37