pROGRAM SCHEDUlE AND HOlDS
UNDERSTANDING pROGRAM SCHEDUlES
The daily schedule is split into four sections:
WAKE: Temperature you would prefer to wake up to .
lEAVE: Temperature when you are away from the house .
RETURN: Temperature you would prefer to return home to .
SlEEp: Temperature you would prefer while sleeping .
The times shown in the table below are the defaults. The start time and temperature of each section can be changed
to fit your schedule. (See changing Program Schedules section on pages 24-25.)
This Home comfort control is pre-set to use the following program settings (see table below). We recommend these
settings, since they can reduce your heating/cooling expenses. The fan program is pre-set to aUTO for all events.
Event designator
Start time
WAKE
6:00AM
LEAVE
8:00AM
RETURN
5:00PM
SLEEP
10:00PM
22
Set temperature
Heat
Cool
70°F (21°C)
78°F (25 .5°C)
62°F (16 .5°C)
85°F (29 .5°C)
70°F (21°C)
78°F (25 .5°C)
62°F (16 .5°C)
82°F (27 .5°C)
pROGRAM SCHEDUlE AND HOlDS
UNDERSTANDING pROGRAM SCHEDUlES
Use the table below to assist in modifying the schedule.
Event designator
WAKE
LEAVE
RETURN
SLEEP
pROGRESSIVE RECOVERy
The Progressive Recovery feature allows the Home comfort control to activate the heating and cooling equipment
Fan
pRIOR to a scheduled event in order to reach the desired temperature at the start of that scheduled event .
AUTO
Example: If the WakE time is 6 am, and the temperature is 70°F, the heat will come on before 6 am, so the
temperature is 70°F by the time you wake at 6 am.
AUTO
AUTO
AUTO
(CONTINUED)
Set temperature
Start time
Heat
Cool
Fan
23