Aprilaire 8910W Owner's Manual
Hide thumbs
Also See for 8910W:
- Safety & installation instructions (13 pages) ,
- Safety & installation instructions (26 pages)
Related Manuals for Aprilaire 8910W
Summary of Contents for Aprilaire 8910W
- Page 1 Home Comfort Control with Wi-Fi ™ Model 8910W READ AND SAVE THESE INSTRUCTIONS Owner’s Manual Includes Operating Instructions and Warranty Information...
-
Page 2: Table Of Contents
.aprilaire .com account . . . . . . . . . . . . . . . . . . -
Page 3: Controls & Display Overview
AbOUT yOUR NEW HOME COMFORT CONTROl AbOUT yOUR NEW HOME COMFORT CONTROl CONTROlS & DISplAy OVERVIEW – HOME SCREEN CONTROlS & DISplAy OVERVIEW – MAIN MENU ROOM TEMPERaTURE CURRENT DAY OUTDOOR TEMPERaTURE TEMPERaTURE SETTING ROOM RELATIVE HUMIDITY AIR CLEANING BUTTON FAN MODE (ENTERS EVENT-BASED ™... -
Page 4: Equipment Control Module Leds
. For detailed instructions for connecting the Home Comfort Control to a Wi-Fi network and registering it to an ™ aprilaire account, refer to the Wi-Fi Quick Start Guide included in the box. visit my.aprilaire.com for instructions press [DONE] to save and exit, or [CANCEl] to exit without about using the aprilaire web and mobile apps. saving. The Home comfort control will save and exit if nothing is pressed within 10 seconds . -
Page 5: Select Fan Setting (On/Auto/Circ)
OpERATION OpERATION SElECT FAN SETTING ClEAN SCREEN MAINTENANCE REMINDERS SCREEN lOCKOUT (ON/AUTO/CIRC) When the fan mode is changed during a program event press [MENU] to enter the main menu . Maintenance reminders are set up by the installer to The user can disable certain features of the Home it remains in that mode until the next event starts. The indicate when the equipment is due for service . If a comfort control. (See User System Setting Table on press [ClEAN SCREEN] to disable the touch screen fan must be programmed to FaN ON in the schedule to... -
Page 6: Indoor Air Quality Functions
INDOOR AIR QUAlITy FUNCTIONS INDOOR AIR QUAlITy FUNCTIONS EVENT-bASED ™ AIR ClEANING EVENT-bASED ™ AIR ClEANING (CONTINUED) press [AIR ClEANING] on the Home screen to enter Automatic: The air cleaner will run a minimum of Air Cleaning Screen 30 minutes every hour . The air cleaner will monitor the Air Cleaning screen . -
Page 7: Humidity Control
INDOOR AIR QUAlITy FUNCTIONS INDOOR AIR QUAlITy FUNCTIONS HUMIDITy CONTROl HUMIDITy CONTROl (CONTINUED) press [HUMIDITy CONTROl] on the Home screen to Humidity Control Screen for Humidification in Automatic Mode In automatic mode you will receive the optimum enter the Humidity Control screen . amount of humidity so that your home and its furnishings are protected from the damaging effects of excess condensation or low humidity during heating... -
Page 8: Manual Mode
INDOOR AIR QUAlITy FUNCTIONS INDOOR AIR QUAlITy FUNCTIONS HUMIDITy CONTROl HUMIDITy CONTROl (CONTINUED) (CONTINUED) Humidity Control Screen for Humidification in Manual Mode In manual mode it is important to anticipate a drop in Outdoor Temperature/Indoor Relative Humidity outdoor temperature and reduce the setting accordingly Outside Temperature Recommended RH to avoid excessive condensation. Use the following... -
Page 9: If Dehumidification Is Installed
INDOOR AIR QUAlITy FUNCTIONS INDOOR AIR QUAlITy FUNCTIONS HUMIDITy CONTROl HUMIDITy CONTROl (CONTINUED) (CONTINUED) If dehumidification is installed the Home Comfort your comfort is the best measure of how to adjust Energy Saving Tip #1: Energy Saving Tip #2: control can be configured, through the installer set-up, your setting. When first installed, your dehumidifier adjust the setting to be as high as is comfortable to If vacating your home for an extended period in the to control dehumidification with either a whole home has to remove all the moisture that is initially in your reduce dehumidification run time –... - Page 10 INDOOR AIR QUAlITy FUNCTIONS INDOOR AIR QUAlITy FUNCTIONS HUMIDITy CONTROl FRESH AIR (CONTINUED) Humidity Control Screen with only Dehumidification Installed press [FRESH AIR] on the Home screen to enter the If ventilation is installed, Fresh air can operate in four Fresh Air screen . different modes . Off: Ventilation will not run . DEHUMIDIFIcaTION SETPOINT Automatic: ventilation will cycle based on the DEHUMIDIFIER aDJUSTMENT...
-
Page 11: Fresh Air
INDOOR AIR QUAlITy FUNCTIONS pROGRAM SCHEDUlE AND HOlDS FRESH AIR SET TIME AND DATE (CONTINUED) Fresh Air Screen press [MENU] to enter the main menu . press to set the hour . press [SET ClK/DATE] to enter clock menu . press [Next], then to set the minute . -
Page 12: Understanding Program Schedules
pROGRAM SCHEDUlE AND HOlDS pROGRAM SCHEDUlE AND HOlDS UNDERSTANDING pROGRAM SCHEDUlES UNDERSTANDING pROGRAM SCHEDUlES (CONTINUED) The daily schedule is split into four sections: Use the table below to assist in modifying the schedule. WAKE: Temperature you would prefer to wake up to . Set temperature lEAVE: Temperature when you are away from the house . Event designator Start time Heat... -
Page 13: Changing Program Schedules
pROGRAM SCHEDUlE AND HOlDS pROGRAM SCHEDUlE AND HOlDS CHANGING pROGRAM SCHEDUlES CHANGING pROGRAM SCHEDUlES (CONTINUED) press [MENU] to enter the main menu . press [Next], then to set the start time of press [Next], then [FAN] to set the fan mode of the The Home comfort control will display the cOPy option. -
Page 14: Heat Blast
pROGRAM SCHEDUlE AND HOlDS pROGRAM SCHEDUlE AND HOlDS HEAT blAST ® pROGRAM SCHEDUlE HOlDS – TEMpORARy pROGRAM SCHEDUlE HOlDS – TEMpORARy pROGRAM SCHEDUlE HOlDS – pERMANENT (CONTINUED) Heat Blast will raise the current room temperature 3°F TEMpORARy pROGRAM HOlD pERMANENT pROGRAM HOlD ®... -
Page 15: Away
pROGRAM SCHEDUlE AND HOlDS pROGRAM SCHEDUlE AND HOlDS pROGRAM SCHEDUlE HOlDS – AwAy pROGRAM SCHEDUlE HOlDS – VACATION AWAy VACATION pROGRAM HOlD press [NEXT], then adjust the dehumidification setting. The away feature, if enabled, allows the Home comfort This energy saving feature allows you to suspend the Note: If dehumidification in vacation mode is not control to be set to a predefined setpoint(s) by simply programmed schedule for extended periods of time. The enabled this step will be skipped. -
Page 16: Wi-Fi Maintenance And Troubleshooting
SCHEDUlE HOlDS – VACATION ClEARING ROUTER SETTINGS REMOVING THE HOME COMFORT CONTROl (CONTINUED) FROM A my.aprilaire.com ACCOUNT press [Next], then [FAN] to set the fan mode . press [Next], then to set end date . If you purchase a new Wi-Fi router or change the... -
Page 17: Disabling The Wi-Fi Radio
WI-FI MAINTENANCE AND TROUblESHOOTING WI-FI MAINTENANCE AND TROUblESHOOTING DISAblING THE WI-FI RADIO TROUblESHOOTING WI-FI CONNECTION Wi-Fi connection status Radio status indicator Message Center Normal Operation . No corresponding message Wi-Fi signal strength is indicated To turn off the Wi-Fi radio on the Home Comfort The Wi-Fi connection status is communicated through by the appropriate number of bars. -
Page 18: Setup Menu
SETUp MENU SETUp MENU HOW TO ENTER THE SETUp MENU TO CHANGE SETTINGS USER SySTEM SETTINGS TAblE The following table is the list of the settings and their details. Default settings are shown in bold . press [MENU] to enter the main menu . press to adjust the setting. (Selected option flashes .) press [SETUp] to enter the setup menu . User system Factory default setting Press [DONE] to save and exit, or [CANCEl] to exit setting... - Page 19 Change in Lockout be made at the thermostat. Note: Only available when Setpoint 1°F to 20°F (0 .5° to 10°C) Radio maintained . Lockout is set to Range . Unregister the Unregisters the thermostat from an Aprilaire account . Use this Menu Lockout Prevent the Menu screen from being accessed at the thermostat. Disable Thermostat when the Home comfort control needs to be registered to a new Note: Only available if no other lockouts are enabled. If another Enable aprilaire account. For instance, if you have purchased a home...
- Page 20 This warranty gives you specific legal rights and you may also have other rights which vary from state to state . FCC RF Radiation Exposure statement WARRANTy REGISTRATION To comply with Fcc/Ic RF exposure limits for general population / uncontrolled exposure, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter . Visit us on-line at www.aprilaire.com to register your aprilaire product. If you do not have on-line access, please mail a postcard with your name, address, phone number, product purchased and date of purchase to: Research Products corporation, P.O. BOX 1467, Madison, WI 53701 your Warranty Registration information will not be sold or shared outside of this company.
- Page 21 (1) t his device may not cause interference, and (2) t his device must accept any interference, including interference that may cause undesired operation of the device. L’exploitation est autorisée aux deux conditions suivantes: (1) l ’appareil ne doit pas produire de brouillage, et (2) l ’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement . P.O. Box 1467 • Madison, WI 53701-1467 • Phone: 800/334-6011 • Fax: 608/257-4357 www.aprilaire.com 61001130 5 .15 U.S. Patent Numbers 8,146,376, 8,596,078 and other patents pending. B2206503A © 2015 aprilaire – a division of Research Products corporation...