Table of Contents
Advertisement
MAkE SuRE YOu hAvE RECEIvED ALL PARTS:
Check your packing list to verify that all listed parts have been received. You should have the following:
• Unvented Gas Log Burner Assembly
• Installation/Operating Instructions
• Ceramic Fiber Logs
• FAI135 Andiron Kit
• RCSIT Hand Held Remote with Receiver
Carefully inspect the contents for shipping damage. If any parts are missing or damaged, immediately
inform the dealer from whom you purchased the appliance. Do not attempt to install any part of the
appliance unless you have all parts in good condition.
WHAT YOU WILL NEED FOR INSTALLATION:
You should have the following items available before proceeding with installation:
• External regulator (for propane/LPG and 1/2 lb. natural gas systems only)
• Piping which complies with local codes
• Screwdriver
• Pipe sealant approved for use with propane/LPG (Resistant to sulfur compounds)
• Drill with 5/32 masonry bit
• Manual shutoff valve
86D0024
• Two (2) Plastic Bags Containing Crushed Volcanic Rock
• Two (2) Anchoring Screws
• Rock wool
• Flickering Bright Embers
Gloves are recommended when
handling ceramic fiber logs to prevent
skin irritation from loose fibers. Logs
are fragile — handle with care.
• Sediment trap (recommended)
• Tee joint.
• Pipe wrench or appropriate size crescent
wrench set
GETTING STARTED
5
Hide quick links:
Advertisement
Table of Contents
