Table of Contents
Advertisement
OPERATING INSTRuCTIONS
FOR YOUR SAFETY READ BEFORE LIGHTING
A. This appliance is equipped with a piezo ignition device which lights the pilot. If
piezo is not working properly see Match lighting instructions, Page 32.
B. BEFORE OPERATING smell all around the appliance area for gas. Be sure to
smell next to the floor because some gas is heavier than air and will settle on
the floor.
WHAT TO DO IF YOU SMELL GAS:
•
Do not attempt to light any appliance.
•
Do not touch any electric switch; do not use any phone in your building.
•
Immediately call your gas supplier from a neighbor's phone. Follow the gas
supplier's instructions.
•
If you cannot reach your gas supplier, call the fire department.
C. Use only your hand to push in, or turn the gas control knob. Never use tools.
If the knob will not push in or turn by hand, don't try to repair it. Call a qualified
service technician. Force or attempted repair may result in a fire or explosion.
D. Do not use this appliance if any part of it has been under water. Immediately call
a qualified service technician to
inspect the appliance and
to replace any part of the
control system and any
gas control that has been
under water.
30
If you do not follow these instruction
exactly, a fire or explosion may result
causing property damage, personal
injury or loss of life.
Figure 34 - Location of Piezo Ignitor, Control Knobs and Switch
Remote Receiver
FP2016
burner controls
Pilot
On/Off/Pilot Knob
FP2016
86D0024
Hide quick links:
Advertisement
Table of Contents
