Choosing Source For Main Picture - Furuno MU-120C Operator's Manual

4.3 Choosing Source for Main Picture

Choose the signal to display on the entire screen as follows:
1. Press the [DISP] key to show the DISP selection window.
Signal names can be changed. For detail, see "3.3.2 Changing the signal name".
2. Press the [▲] or [▼] key to select a signal.
You can also select the signal by pressing the [DISP] key continuously.
RGB1-2: The signal from the chosen RGB port is displayed on the entire screen.
DVI: The signal from the DVI port is displayed on the entire screen.
VIDEO1-3: The external video from the appropriate VIDEO port is displayed on the
entire screen.
3. Press the [◄] or [►] key to close the window.
The window is erased when there is no operation within five seconds.
Note: The name of the selected signal appears at the right top corner for five seconds after
the DISP menu is erased.
RGB1
RGB2
DVI
VIDEO1
VIDEO2
VIDEO3
DISP selection window
16