Remote Control Operation - Monessen Hearth KHLDV400 Install And Operation Instructions

reMOte cOntrOL OperatIOn

Flame Height Setting for thermostatic Mode
Figure 52
1. Hold AUTO button for five (5) seconds and one number and flame icon will appear
in LCD screen.
2. Use the ON / ▲ or OFF / ▼ button to set the desired flame height to 1 (min.) 2
(medium) or 3 (max.).
3. If there is no input within three (3) seconds, the new setting will be transmitted to
the receiver. This setting only affects auto mode operation.
4. The default setting for transmitter is 2 (medium).
3-Speed Blower control
Figure 53
nOte: Blower works automatically with flame.
1. Press FAN button once to enter blower speed setup mode at low speed initially and
one of the three blade icons will display darken on LCD display. Figure 53
2. Continue to press FAN button to set up the blower speed you desire.
3. If there is no input within three (3) seconds, the new setting will be transmitted to
receiver. If the fireplace is on, the blower speed will take effect right away; if the fire-
place is off, the receiver will remember this setting and blower is still off.
4. If you continue to press FAN button to the position that all blades are gone, the FAN
icon will disappear and turn the blower off.
Blower On Delay time and OFF Delay time Setting (Default 5 ON / 8
OFF)
Figure 54
1. Hold FAN button for three (3) seconds and two (2) numbers will appear in the LCD
screen. The upper one is ON Delay Time and the bottom is OFF Delay Time in
minutes.
2. Use the ON / ▲ button to set the desired On Delay Time from 0 to 15 minutes.
3. Use the OFF / ▼ button to set the desired Off Delay Time from 0 to 15 minutes.
3-Level Light Brightness control
Figure 55
1. Press LIGHT button once to change light brightness to low and one of the three levels
will display dark on LCD.
2. Continue to press LIGHT button to set up the light brightness you desire.
3. If there is no input within three (3) seconds, the new setting will be transmitted to the
receiver.
4. If you continue to press LIGHT button, the LIGHT icon will disappear and turn the
light off.
73D0024
KHLDV Series Gas Fireplace
FP2147
Figure 52 -
Flame Height Setting Display
FP2145
3 speed fan
12/08
°F
FP2145
Figure 53 -
FP2145
3 Speed Blower Control
3 speed fan
12/08
FP2146
Figure 54 -
FP2146
Blower Delay Timer Displa
blower delay timer
12/08
°F
FP2148
Figure 55 -
Light Brightness Display
FP2148
light display
12/08
y
41