Monessen Hearth KHLDV400 Install And Operation Instructions page 33

SIGnature cOMManD - OptIOnaL Fan BLOwer SySteM
13. Connect the two (2) wiring harness wires to the wires marked (blower) from the AC Module
and snap wires into clips from Step 9.
14. Replace logs.
15. Replace the glass.
16. Replace the front plate below the glass frame. nOte: the front plate hides the wire har-
ness in the front.
Blower
Right
Blower
Left
Figure 43 -
Blower Wiring Diagram
Electrical Grounding Instructions: This appli-
ance is equipped with a three-prong (grounding)
plug for your protection against shock hazard
and should be plugged directly into a properly
grounded three prong receptacle.
73D0024
To Junction Box
In Fireplace
{
Light White
Black
White
Black
Black
Rear {
White
Burner
Solenoid
FP1915
AC box wiring
8/08
AC Module
Green
Connector
Pin To Control Box
Control Box
KHLDV Series Gas Fireplace
FP1915
33