Examples For The Cpu-Board Mb91F369 Without Any Graphic Subboard; Segger "Emwin" Example For Jasmine - Fujitsu CREMSON MODULAR STARTERKIT User Manual

Table of Contents

7.4.3 Examples for the CPU-Board MB91F369 without any graphic subboard :

Examples_CPU369only

MonDeb-ADA-91369

MonDeb-ADA-91369-RLTimer

MonDeb-ADA-91369-Template

Template_CPU369

NOTE : The project MonDeb-ADA-91369 is the debugger kernel itself. This project needs to

be programmed to the embedded flash of the MB91369 before you can use the debugging

features of Softune Workbench. If you want to change UART, Abort-Button or other settings

you need to modify this project. We recommend that you save a copy of the original monitor

debugger on your local hard disk anyway.

The project Template_CPU369 is a project for using the CPU-board with F369 without

debugger (linked for the embedded flash).

The provided example project for Jasmine demonstrates how to use the "emWin" graphic

library from Segger. emWin is designed to provide an efficient, processor- and LCD

controller-independent graphical user interface (GUI) for any application that operates with a

graphical LCD. It is compatible with single-task and multitask environments, with a

proprietary operating system or with any commercial RTOS. emWin is shipped as "C" source

code. For more information please refer to the readme-information in the project directory or

read about emWin here : http://www.segger.de

Cremson Starterkit User Manual

Chapter 7 . Appendix

Monitor Debugger kernel

Example using a Timer

Example for projects with debugger

Example for projects without debugger

- 32 -

Table of Contents