Panasonic EY4542 Service Manual page 11

Procedure 3A → 3B → 3C → 3D
Ref. No. 3D Assembly of the blade guard assembly.
1. Set the safty cover A with connecting the transparent guard and
tighten a screw.
2. Set the front cover and the safety cover B.
3. Tighten 4 screws on the safety cover B and a screw on the trans-
parent guard.
4. Set the stop ring.
NOTE:
The stop ring has its own direction for assembly. Make sure that
the rounded side faces housing.
And make sure that 2 holes of stop ring should be placed upper
right.
5. Set the inner washer and carefully set the blade.
6. Set the outer washer and tighten the hex bolt using the provided
hex wrench with holding the spindle lock button.
11